EVERY attempt at a profile...
sealevel
PC-DMIS Guru
Last Activity: Yesterday, 08:37 PM
Joined: 08-15-2008
Location: eastern Pacific ocean
-
2019 R2 hasn't fixed THIS yet...... :mad:
Regarding Vision Auto Profile 2D? I'm beyond (even before that previously beyond) miffed about this 'feature'.
EVERY attempt at a profile... -
Glad you got your problem solved.
*tip* SAVE your Reg Editor data regularly. Good to fall back on the backup when after someone has pushed a checkbox... -
Maybe the health of your hardware changed. For easy-peasy fix, like you did...reboot everything. Don't know what your probe is, but when you rebooted...Last edited by sealevel; 08-22-2019, 06:37 PM. -
Not that it's a contest, but I have 10 versions.... but only installed @ home (for reference). 2 versions is more than enough mischief while @ work! ... -
Usually.... When you backsave, you'll get a warning that program will work, but features in the later version will not work in the old version. NB....Leave a comment:
-
Glad you got it fixed, Duane. As for as that remedy you used, I remember trying that for new installed version (2016?....probably 2017) and I don't recall...Leave a comment:
-
To do the vision/camera stuff rather than the probe.... maybe gander @ the Vision section of 2019 R1. Lots of good advice, knowledge and brain treats...Last edited by sealevel; 08-12-2019, 06:21 PM.Leave a comment:
-
That is a start, but not sure the 2D profile patient is OK to get up from the hospital bed just quite yet:::::
...
Leave a comment:
-
If you want to inspect the part 100% with the Optics, then calibrate your 'camera'. Hopefully they gave you the laser-etched glass standard to calibrate...Leave a comment:
-
Apparently it leaves no release immune from it's clutches. I can't say the explanation from Hexagon of WHY it is caused doesn't really sound authoritative.... -
Thanks HAL....err....Singularity.
Excellent help!!
I'll check in the program tomorrow to see if Hexagon, Microsoft and self can agree on how...Leave a comment:
-
Strange pop-up telling me to not use more than 10 characters
I have NEVER seen this one. This pop-up only occurs when trying to create a scan, (any type of scan) It comes up for about 4 times upon opening a scan... -
Are there any clues to align it via the DWG?? (
)
Without seeing a sketch or anything.... here's a shot in the dark.....certain...Leave a comment:
-
That's it anthony..... your reputation is FINISHed!
-
Same PROBE NAME
Same PROBE BUILD
DIFFERENT PROBE FILES on each each computer (do NOT share from network!)
Regardless of the PROBE RACK...Leave a comment:
-
+ one bazillion.
(and only for features with not-too-finicky tolerances)
-
Any Demon updates installed lately? I've asked since forever that when an update is installed, please give us a check box option to install or leave the...Leave a comment:
-
Along with everything mentioned ^^^^^,
my experience using Mr. 443 Perf Optiv Dual Z is that unless you're using Tactile/CMM method?, the CAD doesn't...Leave a comment:
-
Unfortunately.... we only run a 1st shift. The Optiv is planned to get a new, bigger load of implants.... a doubling of customer orders. I think this...Leave a comment:
-
Your quote somehow got me thinking of a similar slogan and the product it was attached to:
I think the...Leave a comment:
No activity results to display
Leave a comment: