Printing command, how to find it.(on my version v2009)
FILE/PRINTING/REPORT WINDOW PRINT SETUP
dph51
PC-DMIS Guru
"So belief comes by hearing, and hearing by the word of Christ."
Joined: 04-26-2008
Location: Rah Cha Cha NY (Rochester NY)
-
The label command goes near the beginning of your program.Leave a comment:
-
If you have a print command before the goto statement
But the program will run forever.Leave a comment:
-
Psuedocode
Label=C1/
program code to repeat
print command
goto/C1Last edited by dph51; 12-08-2018, 07:38 AM.Leave a comment:
-
There is a BASIC help file that you can search for on your computer........ pcdbasic.chm...Leave a comment:
-
Well, you could calculate the 2 circles that intersect the centroids of the 2measured circles.
...Code:ASSIGN/Q=SQRT((CIR2.X-CIR1.X)^2+(CIR2.Y-CIR1.Y)^2)
Leave a comment:
-
Another variation for a solution.
Go up and find first FCF of linear profile type (eg. FCFLOC1)
Get the name of the feature being evaluated...Last edited by dph51; 12-03-2018, 12:07 PM.Leave a comment:
-
I “think maybe” the newer versions of PCDMIS can handle a Datum that is not perpendicular to the other Datums. Xactmeasure only.
Maybe... -
You could search for
Understanding Calibration ResultsLeave a comment:
-
Tell them you will measure it in DCC Mode, letting the CMM follow the correct vector paths to get an accurate measurement.
Don’t say program,...Leave a comment:
-
Just a wild guess, try changing workplane, for reporting.Leave a comment:
No activity results to display
Leave a comment: