ProbFlex
Junior Member
Last Activity: Today, 06:12 PM
Joined: 09-28-2020
Location:
-
Yes, it is assigned to DATAPAGE-RT, it is too in PC-DMIS. I do have a directory inputted inhere. i think its sometime in my programming in PC-DMIS i am... -
Progrmming with infinity in pc-dmis
I am having a difficult time connection PC-DMIS to INFINITY ( data collector). I like to know if i programing it in correctly in to PC-DMIS....
-
Progrmming with infinity in pc-dmis
I am having a difficult time connection PC-DMIS to INFINITY ( data collector). I like to know if i programing it in correctly in to PC-DMIS.
... -
i would just like to remove " 4-A-1-POS" this text. i take a look at the eddit text contents again. thank you Sir. -
I'm under the impression that when implementing a readpoint alignment, I can use that as the start point (first alignment 0,0,0 should help find the part... -
how can i implement a loop in the program, where they don't have to CONRL+Q for every new part and just start it to the start of the program and all the... -
I am trying to dimension a circularity from a contracted circle, with a cylinder (0f 8 points w/ 3 levels) and a plan( with 4 points on 2 levels) and...Last edited by ProbFlex; 10-18-2020, 07:23 PM. -
How do I remove " RADIAL ( 4-A-1-POS) from the report. It shows up next to the runout call out in the report. I am using the GD&T dimension.... -
Hi,
the coordinate was set to the front of fixture. when I move (transform) it to the center where the probe is, the CAD with the fixture moves...Last edited by ProbFlex; 10-18-2020, 07:25 PM. -
Hi,
the cornets was set on the fixture when i move it to the center where the probe is the CAD with the fixture moves into the CMM. how do fix it...Last edited by ProbFlex; 10-18-2020, 07:13 PM.Leave a comment:
-
Remove Text from Report
How do I remove " RADIAL ( 4-A-1-POS) from the report. It shows up next to the runout call out in the report. I am using the GD&T dimensioni...Last edited by ProbFlex; 10-18-2020, 07:02 PM. -
I am trying to demintion a runout by contracting circle from a cylinder (0f a points w/ 3 levels) and a plan( with 4 points on 2 levels) and i am getting... -
Would you be willing to do a short video on how to do that?
thank you....Leave a comment:
-
Silly as it may sound. How do I make sure the CAD Orientation will match how the part will sit on the CMM table? Would you happen to a video on this? -
Thanks everyone!
I am looking forward to the video Ninjabadger!!...Leave a comment:
-
No offense taken. That’s a really good question. I’ve done it once. But working with Rome Arms that feature isn’t needed.
but no... I don’t....Last edited by ProbFlex; 10-01-2020, 01:05 AM.Leave a comment:
-
Thank you. I have and I understand how to use read point. I like to now how do I import the cad and set on the CMM while being offline. As if I was sitting...Leave a comment:
-
Offline Programming
Hi,
I am interested in knowing is once I import the CAD model in to PC-DMIS, how do I set it or should I say link the model together to the CMM...
No activity results to display
Leave a comment: