MBaroni
Junior Member
Last Activity: 02-26-2021, 04:16 AM
Joined: 09-01-2020
Location:
-
Yeah, but this drawing has it (correctly) without the Ø symbol, but (incorrectly) without separate X and Y callout (that's what tricked me), so I'm not... -
I don't know if it's your cup of tea, but I like to export data as .CSV files to use externally. -
Crap, well spotted. I'll edit to reflect this
Edit: On second thought, is that even a valid callout?
I realize now that cylindrical...Last edited by MBaroni; 02-25-2021, 11:01 AM. -
Here how I would approach this:- Create your initial rough alignment however you please
- Measure Datum A as a plane
- Level Z on A and zero Z
- Measure
Leave a comment:
-
Finding the three FCF callouts individually is fine, what you need to evaluate "at once" is all the slots, as a single feature, so you would... -
Ok, now I do have a better Idea of the datums and the overall geometry of the part.
A couple more questions:- How is this part fixtured / held?
- Where
Last edited by MBaroni; 02-25-2021, 06:15 AM.Leave a comment:
-
I would do in a slightly different way:
...Code:ASSIGN/OOTFLAG="" ASSIGN/NUMOOT=0 ASSIGN/NUMOOT=GETPROGRAMINFO("NUMOOT") -
From your description I'm not entirely clear of what Datum A and C are / where they are located, could you post the section of the drawing where they...Leave a comment:
-
JacobCheverie
Whelp looks like I spoke a tad too soon.
MINOR_WORD_TOGGLE does not seem to be working. While It translates to...Last edited by MBaroni; 02-24-2021, 10:44 AM.Leave a comment:
-
Agreed the callout is strange, but it's not it being a "surface" that worries me (on a cylinder, a surface callout is substantially equivalent...Leave a comment:
-
Amazing work. this does everything I want it to except for some minor nitpicks:- RFS tolerance are not shown (I understand this might not be possible
Last edited by MBaroni; 02-23-2021, 12:48 PM.Leave a comment:
-
My apologies for not coming back to you sooner, I have been pulled for an "emergency project" and today is the first day I have a chance to...
No activity results to display
Leave a comment: