ogcharliebrown
Member
Last Activity: Today, 11:51 AM
Joined: 10-23-2019
Location: Colorado
-
LaserJay that really helped with the window layout. Thanks again for that.... -
So I had Neil At Hexagon and Matt Beecher help me with this and it looks like what happened when I ran 2018 R2 the program worked fine then when measuring...Last edited by ogcharliebrown; 08-10-2020, 01:45 PM. -
Have you thought about constructing a circle at the intersection point and then dimension the circle.Leave a comment:
-
ThePudds Grab your surfboard! The sets are starting!... -
What I see is 4 .128 holes with one hole as datum B.Leave a comment:
-
Just import the new models into the program and transform to the position they need to be in. The puzzle piece will let you transform the pieces from...Last edited by ogcharliebrown; 07-30-2020, 02:57 PM.Leave a comment:
-
On the bright side it looks like most of your part is within spec.!
Leave a comment:
-
rjurca Thanks for all your help. What a great help you are with this. If any other issues come up I'll let you know. Have a great day! Chuck...Leave a comment:
-
I have two of the same model one for the top side and the other for the backside. I haven't tried to use one model and just flip it over and realign to... -
RandomJerk why would it only affect the first 3 measurements? It fixes itself after the first 3? It makes no sense to me that's why I rewrote the program... -
JacobCheverie I had that same issue with 2019 R1 that's why I quit using 2019. 2018 Is running so crappy now that I did the last update I tried to go... -
No What I'm doing is importing 2 models so I can run the front and backside of a part so the report is for the whole part. If I run a single model not...Leave a comment:
-
No the alignment was ok. I'm running on 2018 R2 now I'm getting behind trying to get 2020 R1 to work. In 2018 it runs just fine other than the other B.S....Leave a comment:
-
Wonky numbers
I switched from 2018 R2 to 2020 R1 and on a program I have I' m getting some really bad info. Same program works fine on 2018 R2 But when I run it on...Last edited by ogcharliebrown; 07-23-2020, 05:51 PM. -
neil.challinor It is with auto cylinder circle scan. That's what I don't get why the message?...Leave a comment:
-
Asme y14.5
I'm trying to dimension a cylinder using ASME Y14.5 using circular feature and I get a message " size calculation failed due to input feature data....Last edited by ogcharliebrown; 07-30-2020, 02:46 PM. -
Have you contacted Hexagon? Checking the probe build looks OK. I believe this is above my pay scale. -
I just checked my disk and they are calibrating just fine using PCD 2020 R1. Did you get all your prob files to move over?...Leave a comment:
-
Thanks Robert -
before I save as default I want more options to control # of rows and feature type(ground cast....) other wise I have to edit the auto feature. Why save...Last edited by ogcharliebrown; 07-30-2020, 04:32 PM.Leave a comment:
No activity results to display
Leave a comment: