Don Ruggieri
Administrator
Last Activity: Today, 02:53 PM
Joined: 02-28-2006
Location:
-
Thank you JEFMAN As you can see from the notes, we are working aggressively to find and eliminate crashes, among other issues. Some of these may have... -
Check to make sure it did not loosen the stylus . . . ....Leave a comment:
-
Thank you for the follow-up. That gets you running, which is the most important thing, but still it is a workaround. You should be able to calibrate... -
Yes, that is what I meant. Are you saying it is skipping PNT7 and PNT8? From what you've shared I cannot imagine why. Maybe post an image of that section... -
wild guess, maybe they are unmarked?Leave a comment:
-
Click on the Edit Slot Data button in the dialog, then type in the new value in the Z field in your case....Leave a comment:
-
Blade 6.0 Now Released
We at Hexagon Manufacturing Intelligence are proud to bring you PC-DMIS Blade 6.0.
Release Notes
What's New... -
Have you tried recalibrating it?
Are you aware that you can edit the slot locations, drop them in Z by 0.100"?Leave a comment:
-
Submitted where? Attach it here if you want us to try to help. . . . -
Since about 2019 R1, this right-click/zoom capability was removed. This is the explanation that was provided -
We removed right click in...Leave a comment:
-
Are you using Home Page? I have seen cases where there is slight delay in selecting the routine from the home page, and if you rush it, it does open...Leave a comment:
-
Please confirm that 2019 does indeed work ON-LINE. Do the counters update when you jog the machine? If 2019 works then the computer's IP address is... -
Very Welcome -
Good point, I missed that.Leave a comment:
-
What version were you running before, when it worked? Post you script here please. Better yet, have you tried a very small script as a test? Maybe...Leave a comment:
-
I am guessing this is a Hexagon machine with the Leitz controller interface? or maybe the FDC interface? Either way, they require a specific network IP...Leave a comment:
-
This would be easier to answer if you share the names that you've assigned to the probes, along with showing the contents (from the probe changer dialog)...Leave a comment:
-
Check to disable the "Automatically Adjust Probe Head Wrist" angle....Leave a comment:
-
Its off the screen. Try reimporting the settings from your previous version, see if it comes back. Or, go into the Settings Editor and modify it there...Last edited by Don Ruggieri; 03-31-2021, 03:25 PM.Leave a comment:
-
bjgalbreath Are you submitting those crash reports? Can you send (PM) me your license information so I can track them down to see if they tell us anything?...Leave a comment:
No activity results to display
Leave a comment: