Open / close the gripper on a LSPX5 with NJB

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Open / close the gripper on a LSPX5 with NJB

    I just write this thread because, yesterday, I didn't remember how to do it (coming from holidays... !), and just unplug the tesastar to plug the LSPX5.
    I seachd here and in the support section, and didn't find.
    On the NJB, you have to click on the padlock and the tortoise.

    I hope I will find this thread next time !

  • #2
    i ran into this at a customer while i was with hexagon.

    Even as an AE i had to make multiple phone calls to get the answer to this question as these probes are so rare in the field.
    Ex-Hex

    Comment


    • #3
      There's also the function under testsoft, I don't know about FDC panel...

      Comment


      • #4
        JEFMAN you're a Robot, you know everything. Is this your way of just starting conversation about your vacation? Did you take a whole entire month off like the rest of the Europeans? Would be nice to enjoy a whole month off work!
        PcDmis 2015.1 SP10 CAD++
        Global 7-10-7 DC800S

        Comment


        • #5
          Originally posted by Kp61dude! View Post
          JEFMAN you're a Robot, you know everything. Is this your way of just starting conversation about your vacation? Did you take a whole entire month off like the rest of the Europeans? Would be nice to enjoy a whole month off work!
          "Only" 3 weeks...
          No, it's not a way to talk about all the hikes that I made in the Alps

          It's really a "tip and tricks", that I'll be able to use next time when I plug the LSPX5 (about 1 month each year, the rest of the time (when I'm not in vacation ), I use a tesa-star + LSPX1.

          As anthony.alfaro said, it's very hard to find this information, I believe that here is a good place to it (even if a few people only uses it)

          Comment


          • #6
            Originally posted by Kp61dude! View Post
            JEFMANWould be nice to enjoy a whole month off work!
            I only work four days a week now, and had a whole month of vacation - it was quite hard getting into line again...

            AndersI
            SW support - Hexagon Metrology Nordic AB

            Comment


            • #7
              Originally posted by AndersI View Post

              I only work four days a week now, and had a whole month of vacation - it was quite hard getting into line again...
              I can't even begin to fathom what it's like to take that much time off every year along with everyone around you. Imagine what we would build, invent, create if folks in the U.S. had something like that!
              PcDmis 2015.1 SP10 CAD++
              Global 7-10-7 DC800S

              Comment


              • AndersI
                AndersI commented
                Editing a comment
                When the children were small we also added parental leave to the summer vacation - 7 weeks straight off job!

              • Kp61dude!
                Kp61dude! commented
                Editing a comment
                Goodness! .

            Related Topics

            Collapse

            Working...
            X