The new soon to be released version offers the following enhancements
New Hardware
==========
- TESA VISIO 300 Touch Probe support
- Rotary Table Support
- Mycrona Laser support
- OGP Smartscope (Pre 2000 models) Support
New Calibration
===========
- Cross Probe Calibration (for cross calibrating touch and video probes)
- Camera/Stage skew Calibration
- Easier to use Stage Calibration (DCC moves, Automatic Edge Detection)
General Enhancements
================
- Screen Capture automatically capture and output to report any images that include points that exceed a specified tolerance
- Feature locator now supports sound files, so you can instruct the operators on how to measure a feature without them needing to look at the screen.
- Screen Captures offer more flexibility on size and quality of bitmaps so you
can reduce size of your reports and memory used.
- Improved Cross Hair Gage (dashed/dotted/solid/gun sight/tolerance bands)
- Slot and Profile 2d features now have Gage Targets
- Upper and Lower Tolerance bands on Gage Target features
PC-DMIS Vision V4.1 will be demonstrated on the Hexagon Metrology stand at Control, in Germany 9th-12th May.
New Hardware
==========
- TESA VISIO 300 Touch Probe support
- Rotary Table Support
- Mycrona Laser support
- OGP Smartscope (Pre 2000 models) Support
New Calibration
===========
- Cross Probe Calibration (for cross calibrating touch and video probes)
- Camera/Stage skew Calibration
- Easier to use Stage Calibration (DCC moves, Automatic Edge Detection)
General Enhancements
================
- Screen Capture automatically capture and output to report any images that include points that exceed a specified tolerance
- Feature locator now supports sound files, so you can instruct the operators on how to measure a feature without them needing to look at the screen.
- Screen Captures offer more flexibility on size and quality of bitmaps so you
can reduce size of your reports and memory used.
- Improved Cross Hair Gage (dashed/dotted/solid/gun sight/tolerance bands)
- Slot and Profile 2d features now have Gage Targets
- Upper and Lower Tolerance bands on Gage Target features
PC-DMIS Vision V4.1 will be demonstrated on the Hexagon Metrology stand at Control, in Germany 9th-12th May.