Upgraded Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Upgraded Question

    So we upgraded last week from the At901 with TProbe pcdimis 2014 to the AT960 with PCDmis 2019 with Tprobe , amazing unit I must add, but I do have a question that I cant seem to figure out. How do I change the configurations of the buttons and timeout of the Tprobe in 2019 in Tracker Pilot? It is timing out way to fast for my liking. Prior to this I was using Emscon (hurts even saying that) but that is where I found the settings before and with the upgrade it seems to have defaulted back to factory settings. Any help would be appreciated. TY in advance
    Last edited by Snowrider154; 01-21-2020, 08:12 AM.
    Live like James Bond, Die like James Dean

  • #2
    I believe this is part of tracker pilot now if I remember correctly for the AT960. Should be installed on the PC.
    Systems Integrator
    Hexagon Manufacturing Intelligence

    Comment


    • #3
      Peter, We do have pilot and all of the tips and probes are installed. I just cant seem to find the tprobe settings, such as button configs and the timeout feature within tracker pilot.
      .
      Live like James Bond, Die like James Dean

      Comment


      • Peter Fuller
        Peter Fuller commented
        Editing a comment
        Appears that these are not configurable in Tracker pilot. Are you using PC-DMIS with a 960?

      • Snowrider154
        Snowrider154 commented
        Editing a comment
        Yes I am using the AT960-MR with 2019 R2 PCDmis

      • Peter Fuller
        Peter Fuller commented
        Editing a comment
        Unfortunately I don't think it's configurable without a custom script. I believe this is being worked on so it's configurable in PC-DMIS.

    Related Topics

    Collapse

    Working...
    X