Tweet
auto circle
I am measuring a boss and went to change "edit" my spacer for the sample hits from -3.0 to -1.5. But the program will not allow anything but positive numbers. I can not even use the undo to get back to -3.0. I'm running 3.5 MR1.
-
I have alot of parts that are alot alike so I copy a program and change whats needed. Sometimes when I change the hits on auto circle the position changes...04-23-2012, 10:49 AM
-
All,
I have need to move the sample hits for an Auto Measure Circle. Is this possible?
I have half Circles and cannot use the point...10-24-2007, 08:36 AM -
I am running 4.2 cad ++. When I try to auto circle I get an error : machine out of tolerance. It is showing the wrong diameter of the circle after I take...12-12-2012, 04:23 PM
-
Hi all!
I'm running 2013 mr1. In the last week I started having some strange occurrences with auto circles. It doesn't happen with all...08-04-2014, 04:29 PM -
So I'm using 3.7 mr 3 and I'm dimesioning off of a cad when i try to do a stud I go to run it and it dives right in the middle of the stud then goes...10-13-2009, 03:24 PM
Comment