Tweet
I have a BP with the secondary alignment being the width of the channel (30mm +/-1) MMC, my question is will PC_DMIS give me the bonus if I set my rotate to the 2 planes?
Thomas
Thomas
-
-
We (I at least) definately need more info than that. Got a BP?<internet bumper sticker goes here> -
I thought I had a barley-pop fog that I didn't understand the BP and 2 planes. Is that like "look boss, the plane!, the plane!"(2 planes). Seriuosly though more info and we can probably help.sigpic
James MannesComment
-
OK, let me see what I can do about a picture, I know a pic is worth a thousand words, but til than let me try. This part is what I call a hat section (four bends) than perp to that made into a 90 deg. angle, one leg of the angle is Datum A, the 2 sides of the hat are Datum B, and the other angle leg is Datum C.
Thomas
(limited by IT dept)Comment
-
I have many parts that require that the secondary datum B is made of two opposing faces that are perpendicular to datum A within 0.010 at MMC and the...06-01-2012, 03:23 AM -
Hi all! I apologize in advance for being dumb.
I'm having an issue dimensioning a perpendicularity callout correctly. My part is flat...06-26-2006, 09:34 PM -
I have a supplier that has put the question to me as to why MMC bonus from datum A (CL of the 2.06mm width) is not being used (could have up to 0.040mm...03-18-2013, 01:13 PM
-
Hello everyone I have a part with 24 slots where first slot is datum -C- which is 11.2500 from center line.Then it's .250 from that line like on the sketch.I...11-09-2017, 09:06 AM
-
HELLO i'M RUNNING A PROGRAM THAT HAS POSITION TO WITH MMC ON FEATURE CHECKED AND MMC ON DATUM BE .XACT MEASURE DOESN'T ADD BONUS FROM DATUM.DOES ANYONE...09-28-2017, 03:32 PM
Comment