SET UP

[A Disho]

Guys I need your help, I did some changes in the set, and now I forget how to go back , in garphic display window I have a circle and vector on each vector point I checked , How can I get rid of these two features to have only point ID on my roadmap.

and the other problem i have when dimenstion I get the dimenstions without heading , like I get all dimenstions as I want but without.

AX NOMINAL +TOL - TOL MEAS DEV OUTTOL

on the top of each column.

Thank you in advance

A Disho

[craiger_ny]

What version? F10 will take you to the dimension header settings thingy you are having problems with, it is a check box. Don't know off the top of my head on the other one.

Craig

[A Disho]

Thank you Craig , dims set up fixed , what about the display window problem, I run 3.7

A Disho

[bw_bob]

Not sure what version you are running. Place your mouse cursor over the top of the feature and right click. It should bring up a box so you can hide or unhide features.

[Wes Cisco]

dimension tags in graphics window?

If you are trying to get rid of the little white boxes in the graphics window, right click on it and select "hide" or "hide all". If you want the tags to always appear or not then F5 in the 1st pull down select "features", then there is a check box for "display id", make sure you click "apply" before exiting. I think there is a setting somewhere in preferences to turn the vector arrows on or off, but I am not sure where and can't check just this minute. HTH