DataPage Calculation Rules

  • Filter
  • Time
  • Show
Clear All
new posts

  • DataPage Calculation Rules

    Morning all

    Wondering if those of you that use data Page could tell me what I should be seeing or using per the calculation rules.

    As of now I see no difference in data if I have 4,5, or 6 sigma checked.
    I do notice a difference if I use estimated std. dev. for Cp, Cpk v.s. Use sample Std. dev. for Cp, Cpk.

    I haven't used this in awhile and forgot how I had it set up from where I used to work. I think I need to use the actual sample and not the estimated.

    Any thoughts?

  • #2
    Estimated is for use when you are measuring SOME of the total parts while SAMPLE is used when you measure ALL of the total parts in the batch/run/whatever.
    Originally posted by AndersI
    I've got one from September 2006 (bug ticket) which has finally been fixed in 2013.


    • #3
      OK so if I am just running 10 out of the lot then I would use Estimated..

      Well that software is sure smart as to know what my other 20 will be!!! WOW --snicker--

      Thanks Matt it looks like I should use estimated per your response..


      Related Topics


      • Jonathan S
        DataPage vs Minitab Cpk
        by Jonathan S
        I've noticed that the calculated Cpk in DataPage does not match what is calculated in Minitab on the same data set. We don't use DataPage except to collect...
        07-14-2009, 11:41 AM
      • cappy6124
        datapage + gage R&R
        by cappy6124

        does anyone know how to do this?

        i've tried collecting sample data from 3 people 2x a piece, when i use the data in...
        02-13-2013, 08:49 AM
      • Gary Fitzgerald
        Here we go again
        by Gary Fitzgerald
        How come when I get a value of none in the Cpk column of the Capability chart yet it also calls out "Y" for Cpk capable? If it is stating Yes...
        09-21-2009, 11:11 AM
      • DaVe_M
        Statistics Report
        by DaVe_M
        We have recently done a new install of PCDMIS and Datapage on some of our CMM terminals (upgrading to Windows 7), and for some reason, the number of "samples"...
        02-22-2011, 09:31 AM
      • InspectorJester
        Why DataPage?
        by InspectorJester

        I've never used DataPage, and we don't have a lot of SPC at our shop (but we use other tools to inspect the parts that are run on...
        11-30-2017, 08:11 AM