Not pcdmis, need weld stud spec

[kbotta Ultra Senior Member Find all posts View Profile Close kbotta]

Need the outside diameter of the main portion of a M6 x 1.0 weld stud.
The drawing I have does not tell me this dimension.

I need it to build a gage (or have one built) with the size specs (tolerance).
The part mic's at 5.82

Any help would be much'o appreciated'o

Thanks,
Kev

[gage guru Member Find all posts View Profile Close gage guru]

The tolerance I have for this(someone correct me if I am wrong) is 5.974/5.794 for a major OD dia. on the thread. HTH

[kbotta Ultra Senior Member Find all posts View Profile Close kbotta]

That was quick.
Thank you!
Kevin

[gage guru Member Find all posts View Profile Close gage guru]

that is why this forum rocks....much faster response than B&S can give and we all know when someone needs help they don't want to wait all day for it they need ti now. most times that is what makes us look like heroes or not......I deal with threads and gage designs so these items are regular to me....LOL

[Paul Sarrach PC-DMIS Guru Find all posts View Profile Close Paul Sarrach]

b&s on its best day could not and would not be able to answer questions like that. They are limited to the software and I mean Limited . This is much more than a PCDMIS Forum, Its a
Metrology Forum, for people who have PcDmis and a sense of humor . Yes, it Rocks

[kbotta Ultra Senior Member Find all posts View Profile Close kbotta]

Yes HOE, it rocks. (sorry Paul, couldn't resist he he he)

Thanks again...
Kev