I have created the following feature.
I was getting strange Measured readings so I put the same thing into the nominals slot also and they are "different?". V8 & V8.
Do I have a typo here that I'm just not seeing?
F11 =GENERIC/CIRCLE,DEPENDENT,RECT,OUT,$
NOM/XYZ,-1485.0066,-335.8422,591.4699,$
MEAS/XYZ,-1485.0066,-335.8422,591.4699,$
NOM/IJK,-0.034,0.0096,0.9994,$
MEAS/IJK,-0.034,0.0096,0.9994,$
RADIUS/V8,V8
DIM LOC30= LOCATION OF CIRCLE F11 UNITS=MM ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH
AX MEAS NOMINAL +TOL -TOL DEV OUTTOL
R 17.3736 16.4073 0.0100 0.0100 0.9662 0.9562 -------->
END OF DIMENSION LOC30
I was getting strange Measured readings so I put the same thing into the nominals slot also and they are "different?". V8 & V8.
Do I have a typo here that I'm just not seeing?
F11 =GENERIC/CIRCLE,DEPENDENT,RECT,OUT,$
NOM/XYZ,-1485.0066,-335.8422,591.4699,$
MEAS/XYZ,-1485.0066,-335.8422,591.4699,$
NOM/IJK,-0.034,0.0096,0.9994,$
MEAS/IJK,-0.034,0.0096,0.9994,$
RADIUS/V8,V8
DIM LOC30= LOCATION OF CIRCLE F11 UNITS=MM ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH
AX MEAS NOMINAL +TOL -TOL DEV OUTTOL
R 17.3736 16.4073 0.0100 0.0100 0.9662 0.9562 -------->
END OF DIMENSION LOC30
Comment