CMM Travel Range for B&S One

[cmmguy]

Does anyone have the travel envelope for a ONE 7.10.7 relationship to the threaded holes in the table?

Specifically what I need is this:
Zero X and Y against the limit switches in the front left corner of the machine
Place the tipA0B0 in the center of the front left threaded table hole.
What are the X and Y values for that hole(in Metric)

Also what are the real travels of the X & Y?

thanks.

[craiger_ny]

Limited out in X-, Y- > took a readpoint > X, Y zero on readpoint > measured the threaded hole it came in at 2.06, 2.17 > extreme traveled X, Y > took a readpoint > came in at 27.83, 39.75

Mind you I have a One machine with a granite surface add-on. I do not know if the coordinates for the threaded inserts are the same as the plain top.

Craig

[cmmguy]

Limited out in X-, Y- > took a readpoint > X, Y zero on readpoint > measured the threaded hole it came in at 2.06, 2.17 > extreme traveled X, Y > took a readpoint > came in at 27.83, 39.75

Mind you I have a One machine with a granite surface add-on. I do not know if the coordinates for the threaded inserts are the same as the plain top.

Craig

Thanks for the info Craig... I forgot about the tables being different...

Are the threaded holes four columns of 4 holes that are offset half the distance between the holes - 150mm offset, 300mm hole to hole?

[craiger_ny]

Here is what the pattern loks like. 300 mm hole to hole in the X, first row in the X is 3 holes. Then 150 mm in the Y a pattern of 2 holes centered on the first row and so on.

http://i58.photobucket.com/albums/g2...ny/Granite.png

[cmmguy]

Here is what the pattern loks like. 300 mm hole to hole in the X, first row in the X is 3 holes. Then 150 mm in the Y a pattern of 2 holes centered on the first row and so on.

Thanks, that is exactly the same as the non-granite tables... and it looks like my Inventor model also!!

I have been trying to figure out where to put holes in a new fixture to fit on a One. I appreciate the help.

[craiger_ny]

I whipped that out on Inventor so I could post a visual.

[Matthew D. Hoedeman]

I whipped that out on Inventor so I could post a visual.

whip it good

[John Kingston]

whip it good

DEVO

One of the best things to come out of Akron, Ohio.
Mark Mothersbaugh has since gone on to do music for the Rugrats cartoons.

[bw_bob]

DEVO

One of the best things to come out of Akron, Ohio.
Mark Mothersbaugh has since gone on to do music for the Rugrats cartoons.

So john do you still wear your hat ??????


http://www.sohoblues.com/DEVO/previewpages/preview1.jpg

[Matthew D. Hoedeman]

So john do you still wear your hat ??????


http://www.sohoblues.com/DEVO/previewpages/preview1.jpg

(paraphrase to whip it)
When a zit is on your wong
You must pop it
If her hymen is too strong
You must pop it

Pop that zip
Find a virgin's clit

[bw_bob]

(paraphrase to whip it)
When a zit is on your wong
You must pop it
If her hymen is too strong
You must pop it

Pop that zip
Find a virgin's clit

Were the he11 did you here that...LOL......that was funny

[Matthew D. Hoedeman]

Were the he11 did you here that...LOL......that was funny

Long, long time ago. It gets worse from there (at least, what I can remember of it)

[cmmguy]

what the **** happened to my thread.... ?

[Matthew D. Hoedeman]

what the **** happened to my thread.... ?

Can you say "HIJACK"? I knew you could.

[cmmguy]

Can you say "HIJACK"? I knew you could.

If it was a good Hiijaak then ok, but it looks some inbred donkey...