Point Data When Looping

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Point Data When Looping

    I am outputting flatness of a surface but using a loop to gather data points. My concern is I think I created the plane correctly by adding the [1-8] on the end but need some confimation or if there is another (better) way. I have inserted below what I have in the program.

    V1 =LOOP/START, ID = YES, NUMBER = 8, START = 1, SKIP = ,
    OFFSET: XAXIS = 0, YAXIS = 0, ZAXIS = 0, ANGLE = 45
    PNT1 =AUTO/VECTOR POINT,SHOWALLPARAMS = NO
    THEO/0.05,0,0,0,0,1
    ACTL/0.0497,0.0003,0.0001,0,0,1
    TARG/0.05,0,0,0,0,1
    PNT2 =AUTO/VECTOR POINT,SHOWALLPARAMS = NO
    THEO/0.055,0,0,0,0,1
    ACTL/0.0551,0,0.0002,0,0,1
    TARG/0.055,0,0,0,0,1
    PNT3 =AUTO/VECTOR POINT,SHOWALLPARAMS = NO
    THEO/0.06,0,0,0,0,1
    ACTL/0.0601,0,0.0003,0,0,1
    TARG/0.06,0,0,0,0,1
    PNT4 =AUTO/VECTOR POINT,SHOWALLPARAMS = NO
    THEO/0.065,0,0,0,0,1
    ACTL/0.0651,-0.0001,0.0003,0,0,1
    TARG/0.065,0,0,0,0,1
    PNT5 =AUTO/VECTOR POINT,SHOWALLPARAMS = NO
    THEO/0.07,0,0,0,0,1
    ACTL/0.0702,-0.0002,0.0001,0,0,1
    TARG/0.07,0,0,0,0,1
    LOOP/END
    PLN2 =FEAT/PLANE,RECT,TRIANGLE
    THEO/0.06,0,0,0,-0.9932869,0.1156772
    ACTL/0.06,0,0.0002,-0.0209885,-0.9908093,-0.133628
    CONSTR/PLANE,BF,PNT1[1-8],PNT2[1-8],PNT3[1-8],PNT4[1-8],PNT5[1-8],,
    OUTLIER_REMOVAL/OFF,3
    FILTER/OFF,WAVELENGTH=0
    DEA MISTRAL
    PC DMIS CAD++
    Version 2013
    Windows 7 64bit
    DataPage+ 2011 MR1

  • #2
    one thing - use bestfit recomp in the plane so that the probe comp is recalced on the points.
    Links to my utilities for PCDMIS

    Comment

    Related Topics

    Collapse

    Working...
    X