dimension info box

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dimension info box

    Hello all
    I would like to know if there is away to reset the dimension info box to zero at the start of the program.
    I run capability studys that take up to 20 min and would like to see how it is and where in the program I am.
    thank for any help.
    Global Image 7107 4.2 MR1
    Global Advantage 575 4.2 MR1
    Mitutoyo FN1106 4.2 MR1 with STI

  • #2
    You could run the program Off-Line to reset all the values to nominal...
    Running offline should only take a few minutes in a 20 minute program.
    Lately, it occurs to me
    What a long, strange trip it's been.

    2017 R1 (Offline programming)

    Comment


    • #3
      that i did and that works only if you open and close the program every time.
      but if you do the ctrl-Q to restart the program the numbers are the same as the last run of the program.
      Global Image 7107 4.2 MR1
      Global Advantage 575 4.2 MR1
      Mitutoyo FN1106 4.2 MR1 with STI

      Comment

      Related Topics

      Collapse

      Working...
      X