HITS ON CALIBRATION SPHERE

[george frick Senior Member Find all posts View Profile Close george frick]

HOW MANY HITS DO YOU TAKE TO QUALIFY YOUR PROBES?

[Paul Sarrach PC-DMIS Guru Find all posts View Profile Close Paul Sarrach]

Did some one get a raise? Hey George, New Suit? Looooooking Gooooood

[george frick Senior Member Find all posts View Profile Close george frick]

BIG MONEY

Did some one get a raise? Hey George, New Suit? Looooooking Gooooood

NAAAAW-JUST A REFLECTION OF US HIGH DOLLAR PROFESSIONAL MEASURERS

[Paul Sarrach PC-DMIS Guru Find all posts View Profile Close Paul Sarrach]

You know I would do this job for alot less, then most jobs. But I dont have to. I actually smile when I see my check. I can not believe they pay me what the do, For something I love to do. I pay 266 a week in child support, and still pay all my bills, and still have plenty of fun money. In fact at the end of this school year (june) I will stop paying on my daughter Raven, thats 177 a week alone.

[JamesMannes PC-DMIS Guru Find all posts View Profile Close JamesMannes]

Everyone should notice the high amount of points I take. Keep in mind that 25 is the minimum amount for the SP600 to be properly qualified.

[tlnzz Member Find all posts View Profile Close tlnzz]

13 as received, programmed for from B&S.

[KillGorack Member Find all posts View Profile Close KillGorack]

eight hits 4 around equator 3, and then one on top. Our tipqual program does 30 od angles/tips on each arm. Its fully automatic, and takes around 30 minutes. We qualify once a day or everyother shift.

[slinky1561 Member Find all posts View Profile Close slinky1561]

5 is good 4 me!!!
9 if I want to drag the job out

[kbotta Ultra Senior Member Find all posts View Profile Close kbotta]

5

I use 5. Don't even know why?! Just always have. I suppose.

Good poll.

Kev

[Boom Boom Junior Member Find all posts View Profile Close Boom Boom]

Only five hits, i get bored if it's anymore.

[rebeldude Senior Member Find all posts View Profile Close rebeldude]

I use 5. I was told the least amount of tolerance you are allowed, the more points around the sphere yo need to take

[kiddo Junior Member Find all posts View Profile Close kiddo]

NINE >>>>

[William Johnson Ultra Senior Member Find all posts View Profile Close William Johnson]

25 for me With my SP600, and 13 on my TP200. I have alot of close tolerances. True positions of .005 or less.

[george frick Senior Member Find all posts View Profile Close george frick]

PROBE QUALIFICATION

THIS IS AN INTERESTING POLL. I ALSO USE 5 HITS AS SOME OF OUR CYLINDRICAL PARTS HAVE SO MANY PROBE ROTATIONS. SOME OF OUR PROGRAMS TAKE 30 TO 40 MINUTES TO CALIBRATE USING ONLY 5 HITS. MOST OF OUR PARTS HAVE .010 TRUE-POSITION ON 90% OF THE HOLE LOCATIONS ALTHOUGH WE HAVE HAD SOME WITH .000 TRUE-POSITION @ MMC. I BELIEVE IN BNS TRAINING THE "RECOMMENDED" # OF HITS WERE 13?

[Hardrive Technical Preview User Find all posts View Profile Close Hardrive]

Five is just fine for me. With all the angles I use it could take me all day.