Automotive Direction letters

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Automotive Direction letters

    Version 3.52
    When I tolerance the vector direction (T) on form hits the automotive direction letters are sometimes wrong. Does anyone have a explation for this and how can I correct it.

Related Topics

Collapse

  • wdstock1955
    Plane reversing Z direction
    by wdstock1955
    I am taking 4 hits, manually, on the rim of a thin walled bowl, setting up my Z+ alignment. I always level at this point. About every 3rd time I run...
    01-29-2010, 04:03 PM
  • Steve R
    Cylu
    by Steve R
    Hi all, can the true position of a cylinder be affected if the vector is in the reverse direction top to bottom...
    05-05-2017, 01:30 AM
  • firehaus
    Homing Direction
    by firehaus
    Hi All,
    Just started a new job using a Dea Vento horizontal machine and noticed the initial direction default setting for homing the machine is...
    06-23-2006, 01:39 PM
  • psalm2
    Auto deviation letters
    by psalm2
    ver 3.52

    Sometimes the T value will give the incorrect letter. Is it something Im doing wrong or is it in the software version.
    ...
    12-12-2006, 11:07 AM
  • Cathy
    Deviation direction
    by Cathy
    Useing datavue, I am having a problem with the deviation direction. an edge hit in Z usually shows in a different direction, FA or CC. is there a way...
    01-06-2010, 02:39 PM
Working...
X