Contract Programming and Inspection

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Contract Programming and Inspection

    What is the going rate for contract programming and inspection per hour around the midwest? I am trying to come up with a cost justification for some extra capacity here.
    sigpic GDTPS - 0584

  • #2
    Think I saw $50/hr+ floating around. Should depend on how many features etc too.
    I used to be high on life but I built up a tolerance.

    Brown & Sharpe Global Advantage
    PCDMIS CAD++ v2011mr2
    PH10MQ/SP600M


    sigpic

    Comment


    • #3
      Originally posted by Underspec View Post
      Think I saw $50/hr+ floating around. Should depend on how many features etc too.
      I don't think that $50/hr would even pay for a contract prgrammer let alone machine time. I thought that the going rate was at least twice that.
      Saving the world, one bad part at a time.

      Comment


      • #4
        90 to 150 depending on backlog, customer attitude...

        most good programmers would quote it by the job and not the hour anyway, unless it is onsite and no defined job.
        Links to my utilities for PCDMIS

        Comment


        • #5
          Usually we qouted at $65 an hour for contract inspection.
          Contract programming is done per job.
          On site programming is $125 an hour.
          Kevin

          Comment


          • #6
            I called a local shop here and was told $55/hr. This is what I'll use. Thanks
            sigpic GDTPS - 0584

            Comment


            • #7
              Originally posted by inspector212 View Post
              I called a local shop here and was told $55/hr. This is what I'll use. Thanks
              THat is exactly what I was going to say $55 / hr because we needed some offshift work done a while back and that was the going rate.
              Bill Jarrells
              A lie can travel half way around the world while the truth is putting on its shoes. - Mark Twain

              Comment


              • #8
                Originally posted by inspector212 View Post
                I called a local shop here and was told $55/hr. This is what I'll use. Thanks

                Ding Ding Ding, wish I was on the price was right.
                I used to be high on life but I built up a tolerance.

                Brown & Sharpe Global Advantage
                PCDMIS CAD++ v2011mr2
                PH10MQ/SP600M


                sigpic

                Comment


                • #9
                  Originally posted by inspector212 View Post
                  I called a local shop here and was told $55/hr. This is what I'll use. Thanks

                  Wow, I'm amazed. Was that a contract CMM shop or someone with extra plate time for sale?
                  Saving the world, one bad part at a time.

                  Comment


                  • #10
                    Originally posted by EHines View Post
                    Wow, I'm amazed. Was that a contract CMM shop or someone with extra plate time for sale?
                    Oh wait. You are buying PLATE time for that?? WOW!!! that is cheap!! I was talking about a contract CMM Guy coming in to our facility and running our parts on our machine.
                    Bill Jarrells
                    A lie can travel half way around the world while the truth is putting on its shoes. - Mark Twain

                    Comment


                    • #11
                      No, sorry this was for some inspection shop to measure our parts for us.
                      sigpic GDTPS - 0584

                      Comment


                      • #12
                        In the Detroit area the going rate is between $55 and $75 per hour for contract CMM inspection. Most of the places have a $200 minimum. If a multiple piece program needs to be written, we are charged for the time to write the program, then a price per part.
                        Marty Dobson
                        Director of Quality
                        http://www.linkedin.com/in/mjdobson

                        PC-DMIS CAD V4.2 MR1 & V2011
                        PH10MQ
                        TP200

                        Comment

                        Related Topics

                        Collapse

                        Working...
                        X