Probe Changer

[emurray]

What is the process you all use to make the head automatically pick up and load the probes? My programs continue to prompt me to load manually. I have tried all I know to do

[spazus_maximus]

You will have to define your probe changer & which probes are in which slots also you will need to calibrate your changer & set your load point. Help files should be able to guide you through this....

[Wingman]

Operation / Calibrate Edit / Probe Changer

[rangerboat72]

Operation / Calibrate Edit / Probe Changer

Yup! If I remember correctly. Mine's been broken for about a year now. For some reason it just lost communication with the P.C. and will not engage. The boss-hole still hasn't budgeted a new one.

[Addison Wood]

Also make sure your portlock has the module for the probe changer. Open Pcdmis go to Help/About Pcdmis and in the Module drop down window see if Tool Changer is there. If not you will have to contact Hexegon and purchase it.

[John Kingston]

........ The boss-hole still hasn't budgeted a new one.

Yes he has, it is called "your salary".

[rangerboat72]

Yes he has, it is called "your salary".

True. He doesn't realize it's costing him in the long-run though.