Problem with graphics/CAD

[John Riggins]

3.7 MR3
Offline seat

I am having troubles with the feature Labels turning white.
Also, when this happens sometimes the dialoge window that I am using (Auto Vector Point for example) will also turm white (blank) for all or only part of the window.

[Underspec]

I would turn down your color depth. I don't see why you would need 32bit . Also do you have your system set to "Adjust for best performance"??

I would also run a dxdiag on your card to make sure there are no conflicts etc. Goto START > RUN > DXDIAG > Display TAB > and use the TEST Direct3d and the TEST directdraw.

[John Riggins]

I would turn down your color depth. I don't see why you would need 32bit . Also do you have your system set to "Adjust for best performance"??

I would also run a dxdiag on your card to make sure there are no conflicts etc. Goto START > RUN > DXDIAG > Display TAB > and use the TEST Direct3d and the TEST directdraw.

I ran the tests. All seems fine.
"Adjust for best performance" where?
Color depth does not seem to be adjustable (or I just don't know how).

JR

[Wingman]

I ran the tests. All seems fine.
"Adjust for best performance" where?
Color depth does not seem to be adjustable (or I just don't know how).

JR

Control Panel
System
Advanced
Performance

[John Riggins]

Control Panel
System
Advanced
Performance

Thanks Wingman,
I adjusted the system and I figgered how to change the color depth.
The result on the color depth change was muchly suckful.
No matter what I have changed I still have the same problem.
I am getting a new video card.
Will let ya know.

[Bill **********]

With 3.X they changed CAD engines within PCDmis and this has been a problem since. I've never gotten a response from tech support about how to correct it.

Bill

[John Riggins]

With 3.X they changed CAD engines within PCDmis and this has been a problem since. I've never gotten a response from tech support about how to correct it.

Bill

I only get this problem on one of the PCs we have PCD installed on.

[Don Henger]

I only get this problem on one of the PCs we have PCD installed on.

Try going to FILE/PRINT/PRINT PREVEIW. after that just look at it and close it. For some reason (the demon) puts back all the feature names and turns the white screen back.. This works in 3.7mr3 Worth a try