-
Thats funny (strange) you mention that issue regarding speed -vs- accuracy. I was just speaking to someone last night about that same thing and they also have a "fx" machine. We discussed the proper way to calibrate and measure ..... calibrate at 1%, measure at 1% probe speed. Also the prehit was discussed ....whether there was enough distance for the axis of the machine to follow the approach vector and get proper compensation. After all was said and done we didn't have any other possible reasons for the issue you and he has.......very interesting. I will post again if we come up with something...........Happy Easter -
large Speed Errors
I have worked on several Brown & Sharpe Global Machines and am currently working on the "fx". I have not seen the large differences in measurement based on Motion Speed that I have with this Machine. I think that there is something wrong with the machine and was hoping that prehaps someone out there may have encountered this situation. Any helpful feedback is greatly apprciated.
Thanks G
-
I am using v4.1 on a B&S One 7.5.7 and am having huge fluctuation in linear measurements (in this case slot widths). If i slow the machine speed...09-16-2016, 01:36 PM -
Hi,
I have a LK CMM with a old controller, it has a jogbox that does not have speed control(I have to change the controller if I have to...10-07-2015, 04:52 PM -
!Yet another newbie question!
We just updated to v.4.2. Since that time my machine has been moving much slower than it was. Is there a speed setting...10-02-2007, 04:49 PM -
I am trying to solve some issues with people here that always turn the speed down on the jog box to around 50%. I have always told people to use the same...02-06-2007, 03:59 PM
-
Hi everyone , I am having a problem with the speed of my cmm my programs and calibration runs slow, even with the speed up to 100%, what can I do...12-06-2016, 08:21 PM
Leave a comment: