Help with Lowest Point Again

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Help with Lowest Point Again

    I'm back on this project and I had ask for some help about a month back and I got alot of imput. I thought that what I had program was working. When I looked at the program the generic point was dropped from my alignment. I need to find the lowest point in the X axes and set that point to X 0. I have 8 points (TT1 - TT8) that I have taken. I have created a assignment and it does find the lowest point. I have created a generic point (TT9). Now how do you assign the lowest point to TT9 the generic point? I have tried a couple different things, but the assignment will be red (error) This is what I have.

    3.7MR2

    Thanks Gary

    [SIZE="1"]
    MOVE/CLEARPLANE
    TT1 =AUTO/EDGE POINT,SHOWALLPARAMS = YES
    THEO/26.75,-65,1.355,1,0,0
    ACTL/26.429,-64.981,0.223,1,0,0
    TARG/26.75,-65,1.355,1,0,0
    THEO_THICKNESS = 0,POLAR,EDGE ACTL_THICKNESS = 0,ONERROR = NO,$
    AUTO MOVE = NO,DISTANCE = 0,RMEAS = None,None,None,MEASURE ORDER = SURFACE,$
    SURFACE NORMAL = 0,0.4103647,-0.9119215,$
    INIT = 1,PERM = 1,SPACER = 1,INDENT = 0.5,DEPTH = 0
    MOVE/CLEARPLANE
    TT2 =AUTO/EDGE POINT,SHOWALLPARAMS = YES
    THEO/26.75,-20,1.355,1,0,0
    ACTL/26.537,-19.998,0.342,1,0,0
    TARG/26.75,-20,1.355,1,0,0
    THEO_THICKNESS = 0,POLAR,EDGE ACTL_THICKNESS = 0,ONERROR = NO,$
    AUTO MOVE = NO,DISTANCE = 0,RMEAS = None,None,None,MEASURE ORDER = SURFACE,$
    SURFACE NORMAL = 0,0.9349975,-0.3546542,$
    INIT = 1,PERM = 1,SPACER = 1,INDENT = 0.5,DEPTH = 0
    MOVE/CLEARPLANE
    TT3 =AUTO/EDGE POINT,SHOWALLPARAMS = YES
    THEO/26.75,25,1.355,1,0,0
    ACTL/26.52,25.004,0.331,1,0,0
    TARG/26.75,25,1.355,1,0,0
    THEO_THICKNESS = 0,POLAR,EDGE ACTL_THICKNESS = 0,ONERROR = NO,$
    AUTO MOVE = NO,DISTANCE = 0,RMEAS = None,None,None,MEASURE ORDER = SURFACE,$
    SURFACE NORMAL = 0,0.9119215,0.4103647,$
    INIT = 1,PERM = 1,SPACER = 1,INDENT = 0.5,DEPTH = 0
    MOVE/CLEARPLANE
    TT4 =AUTO/EDGE POINT,SHOWALLPARAMS = YES
    THEO/26.75,70,1.355,1,0,0
    ACTL/26.309,70.008,0.079,1,0,0
    TARG/26.75,70,1.355,1,0,0
    THEO_THICKNESS = 0,POLAR,EDGE ACTL_THICKNESS = 0,ONERROR = NO,$
    AUTO MOVE = NO,DISTANCE = 0,RMEAS = None,None,None,MEASURE ORDER = SURFACE,$
    SURFACE NORMAL = 0,0.3546542,0.9349975,$
    INIT = 1,PERM = 1,SPACER = 1,INDENT = 0.5,DEPTH = 0
    MOVE/CLEARPLANE
    TT5 =AUTO/EDGE POINT,SHOWALLPARAMS = YES
    THEO/26.75,115,1.355,1,0,0
    ACTL/26.065,115.01,-0.064,1,0,0
    TARG/26.75,115,1.355,1,0,0
    THEO_THICKNESS = 0,POLAR,EDGE ACTL_THICKNESS = 0,ONERROR = NO,$
    AUTO MOVE = NO,DISTANCE = 0,RMEAS = None,None,None,MEASURE ORDER = SURFACE,$
    SURFACE NORMAL = 0,-0.4103647,0.9119215,$
    INIT = 1,PERM = 1,SPACER = 1,INDENT = 0.5,DEPTH = 0
    MOVE/CLEARPLANE
    TT6 =AUTO/EDGE POINT,SHOWALLPARAMS = YES
    THEO/26.75,160,1.355,1,0,0
    ACTL/25.863,160.039,-0.17,1,0,0
    TARG/26.75,160,1.355,1,0,0
    THEO_THICKNESS = 0,POLAR,EDGE ACTL_THICKNESS = 0,ONERROR = NO,$
    AUTO MOVE = NO,DISTANCE = 0,RMEAS = None,None,None,MEASURE ORDER = SURFACE,$
    SURFACE NORMAL = 0,-0.9349975,0.3546542,$
    INIT = 1,PERM = 1,SPACER = 1,INDENT = 0.5,DEPTH = 0
    MOVE/CLEARPLANE
    TT7 =AUTO/EDGE POINT,SHOWALLPARAMS = YES
    THEO/26.75,-155,1.355,1,0,0
    ACTL/26.097,-154.983,-0.017,1,0,0
    TARG/26.75,-155,1.355,1,0,0
    THEO_THICKNESS = 0,POLAR,EDGE ACTL_THICKNESS = 0,ONERROR = NO,$
    AUTO MOVE = NO,DISTANCE = 0,RMEAS = None,None,None,MEASURE ORDER = SURFACE,$
    SURFACE NORMAL = 0,-0.9119215,-0.4103647,$
    INIT = 1,PERM = 1,SPACER = 1,INDENT = 0.5,DEPTH = 0
    MOVE/CLEARPLANE
    TT8 =AUTO/EDGE POINT,SHOWALLPARAMS = YES
    THEO/26.75,-110,1.355,1,0,0
    ACTL/26.272,-109.993,-0.045,1,0,0
    TARG/26.75,-110,1.355,1,0,0
    THEO_THICKNESS = 0,POLAR,EDGE ACTL_THICKNESS = 0,ONERROR = NO,$
    AUTO MOVE = NO,DISTANCE = 0,RMEAS = None,None,None,MEASURE ORDER = SURFACE,$
    SURFACE NORMAL = 0,-0.3546542,-0.9349975,$
    INIT = 1,PERM = 1,SPACER = 1,INDENT = 0.5,DEPTH = 0
    TT9 =GENERIC/POINT,DEPENDENT,RECT,$
    NOM/XYZ,26.75,0,0,$
    MEAS/XYZ,26.75,0,0,$
    NOM/IJK,1,0,0,$
    MEAS/IJK,1,0,0
    ASSIGN/V1 = TT1.X
    ASSIGN/V2 = TT2.X
    ASSIGN/V3 = TT3.X
    ASSIGN/V4 = TT4.X
    ASSIGN/V5 = TT5.X
    ASSIGN/V6 = TT6.X
    ASSIGN/V7 = TT7.X
    ASSIGN/V8 = TT8.X
    ASSIGN/V9 = ARRAY(V1,V2,V3,V4,V5,V6,V7,V8)
    ASSIGNV10 = MIN(V9)
    Tags: None
  • #2
    Originally posted by Gary McElwain View Post
    I'm back on this project and I had ask for some help about a month back and I got alot of imput. I thought that what I had program was working. When I looked at the program the generic point was dropped from my alignment. I need to find the lowest point in the X axes and set that point to X 0. I have 8 points (TT1 - TT8) that I have taken. I have created a assignment and it does find the lowest point. I have created a generic point (TT9). Now how do you assign the lowest point to TT9 the generic point? I have tried a couple different things, but the assignment will be red (error) This is what I have.

    3.7MR2

    Thanks Gary

    [SIZE="1"]
    MOVE/CLEARPLANE
    TT1 =AUTO/EDGE POINT,SHOWALLPARAMS = YES
    THEO/26.75,-65,1.355,1,0,0
    ACTL/26.429,-64.981,0.223,1,0,0
    TARG/26.75,-65,1.355,1,0,0
    THEO_THICKNESS = 0,POLAR,EDGE ACTL_THICKNESS = 0,ONERROR = NO,$
    AUTO MOVE = NO,DISTANCE = 0,RMEAS = None,None,None,MEASURE ORDER = SURFACE,$
    SURFACE NORMAL = 0,0.4103647,-0.9119215,$
    INIT = 1,PERM = 1,SPACER = 1,INDENT = 0.5,DEPTH = 0
    MOVE/CLEARPLANE
    TT2 =AUTO/EDGE POINT,SHOWALLPARAMS = YES
    THEO/26.75,-20,1.355,1,0,0
    ACTL/26.537,-19.998,0.342,1,0,0
    TARG/26.75,-20,1.355,1,0,0
    THEO_THICKNESS = 0,POLAR,EDGE ACTL_THICKNESS = 0,ONERROR = NO,$
    AUTO MOVE = NO,DISTANCE = 0,RMEAS = None,None,None,MEASURE ORDER = SURFACE,$
    SURFACE NORMAL = 0,0.9349975,-0.3546542,$
    INIT = 1,PERM = 1,SPACER = 1,INDENT = 0.5,DEPTH = 0
    MOVE/CLEARPLANE
    TT3 =AUTO/EDGE POINT,SHOWALLPARAMS = YES
    THEO/26.75,25,1.355,1,0,0
    ACTL/26.52,25.004,0.331,1,0,0
    TARG/26.75,25,1.355,1,0,0
    THEO_THICKNESS = 0,POLAR,EDGE ACTL_THICKNESS = 0,ONERROR = NO,$
    AUTO MOVE = NO,DISTANCE = 0,RMEAS = None,None,None,MEASURE ORDER = SURFACE,$
    SURFACE NORMAL = 0,0.9119215,0.4103647,$
    INIT = 1,PERM = 1,SPACER = 1,INDENT = 0.5,DEPTH = 0
    MOVE/CLEARPLANE
    TT4 =AUTO/EDGE POINT,SHOWALLPARAMS = YES
    THEO/26.75,70,1.355,1,0,0
    ACTL/26.309,70.008,0.079,1,0,0
    TARG/26.75,70,1.355,1,0,0
    THEO_THICKNESS = 0,POLAR,EDGE ACTL_THICKNESS = 0,ONERROR = NO,$
    AUTO MOVE = NO,DISTANCE = 0,RMEAS = None,None,None,MEASURE ORDER = SURFACE,$
    SURFACE NORMAL = 0,0.3546542,0.9349975,$
    INIT = 1,PERM = 1,SPACER = 1,INDENT = 0.5,DEPTH = 0
    MOVE/CLEARPLANE
    TT5 =AUTO/EDGE POINT,SHOWALLPARAMS = YES
    THEO/26.75,115,1.355,1,0,0
    ACTL/26.065,115.01,-0.064,1,0,0
    TARG/26.75,115,1.355,1,0,0
    THEO_THICKNESS = 0,POLAR,EDGE ACTL_THICKNESS = 0,ONERROR = NO,$
    AUTO MOVE = NO,DISTANCE = 0,RMEAS = None,None,None,MEASURE ORDER = SURFACE,$
    SURFACE NORMAL = 0,-0.4103647,0.9119215,$
    INIT = 1,PERM = 1,SPACER = 1,INDENT = 0.5,DEPTH = 0
    MOVE/CLEARPLANE
    TT6 =AUTO/EDGE POINT,SHOWALLPARAMS = YES
    THEO/26.75,160,1.355,1,0,0
    ACTL/25.863,160.039,-0.17,1,0,0
    TARG/26.75,160,1.355,1,0,0
    THEO_THICKNESS = 0,POLAR,EDGE ACTL_THICKNESS = 0,ONERROR = NO,$
    AUTO MOVE = NO,DISTANCE = 0,RMEAS = None,None,None,MEASURE ORDER = SURFACE,$
    SURFACE NORMAL = 0,-0.9349975,0.3546542,$
    INIT = 1,PERM = 1,SPACER = 1,INDENT = 0.5,DEPTH = 0
    MOVE/CLEARPLANE
    TT7 =AUTO/EDGE POINT,SHOWALLPARAMS = YES
    THEO/26.75,-155,1.355,1,0,0
    ACTL/26.097,-154.983,-0.017,1,0,0
    TARG/26.75,-155,1.355,1,0,0
    THEO_THICKNESS = 0,POLAR,EDGE ACTL_THICKNESS = 0,ONERROR = NO,$
    AUTO MOVE = NO,DISTANCE = 0,RMEAS = None,None,None,MEASURE ORDER = SURFACE,$
    SURFACE NORMAL = 0,-0.9119215,-0.4103647,$
    INIT = 1,PERM = 1,SPACER = 1,INDENT = 0.5,DEPTH = 0
    MOVE/CLEARPLANE
    TT8 =AUTO/EDGE POINT,SHOWALLPARAMS = YES
    THEO/26.75,-110,1.355,1,0,0
    ACTL/26.272,-109.993,-0.045,1,0,0
    TARG/26.75,-110,1.355,1,0,0
    THEO_THICKNESS = 0,POLAR,EDGE ACTL_THICKNESS = 0,ONERROR = NO,$
    AUTO MOVE = NO,DISTANCE = 0,RMEAS = None,None,None,MEASURE ORDER = SURFACE,$
    SURFACE NORMAL = 0,-0.3546542,-0.9349975,$
    INIT = 1,PERM = 1,SPACER = 1,INDENT = 0.5,DEPTH = 0
    ASSIGN/V1 = TT1.X
    ASSIGN/V2 = TT2.X
    ASSIGN/V3 = TT3.X
    ASSIGN/V4 = TT4.X
    ASSIGN/V5 = TT5.X
    ASSIGN/V6 = TT6.X
    ASSIGN/V7 = TT7.X
    ASSIGN/V8 = TT8.X
    ASSIGN/V9 = ARRAY(V1,V2,V3,V4,V5,V6,V7,V8)
    ASSIGNV10 = MIN(V9)
    F1 Put generic after assignments =GENERIC/POINT,DEPENDENT,RECT,$
    NOM/XYZ,V10,0,0,$
    MEAS/XYZ,0,0,0,$
    NOM/IJK,0,0,1,$
    MEAS/IJK,0,0,1
    sigpic.....Its called golf because all the other 4 letter words were taken

    Comment

    • #3
      Thanks bw bob. Once you see it clicks. Thanks Gary

      Comment

      Previous template Next

      Related Topics

      Collapse
      Working...
      X