Can anyone explain why I got a error message "An unsupported sprpting operation was attempted" ?
Error message using profile dimension
Collapse
X
-
Originally posted by GRS&S View PostCan anyone explain why I got a error message "An unsupported sprpting operation was attempted" ?
Please fill out the User CP in the tool bar up top. That will help us a lot in trying to figure out what may be happening!
Jan.***************************
PC-DMIS/NC 2010MR3; 15 December 2010; running on 18 machine tools.
Romer Infinite; PC-DMIS 2010 MR3; 15 December 2010.
-
Sorry, there are actually three of us with access to this login and apparently one of my co-workers entered this. We are about 2 weeks past the initial training for PC-DMIS so we are neophytes with the software. From what I gather, a simple program was written to measure a Surface Profile to be used for Measurement Studies. The step for calculating the Surface Profile was inadvertantly omitted. The operator went back and added the step as the last line in the program. When the program ran for the next part all points were taken correctly but when it came to the calculation , the program froze with the Unsupported Scripting Error Message. It also froze the software to the point of needing to restart the computer.
I should also note that we have a "bastardized" CMM set-up
Sheffield Cordax RS-50 CMM
PC-DMIS 4.2 Software
Omni-Tech OTC5000C Controller
Windows XP ProfessionalSheffield Cordax RS-50
PC-DMIS V4.2
Comment
Related Topics
Collapse
-
by GEllsworthWhy do I receive this error when I try to tolerance a profile dimension. this is the first time I have seen this and have done this many times, but for...
-
Channel: PC-DMIS for CMMs
02-05-2010, 05:55 PM -
-
Has anyone ever ecountered the problem, that as soon as PCDMIS goes to initialize it throws ERROR 101
which says: Incorrect message format [wrong...-
Channel: PC-DMIS for CMMs
12-05-2012, 12:18 AM -
-
by Rik84Dear All,
I have the following error message: TR_SAF00, Safety System Violation.
When this message appears the PH10MQ head shuts...-
Channel: PC-DMIS for CMMs
02-03-2012, 03:56 AM -
-
by Big JeffersWhen I Open Up Pcdmis I Get An Error Message Saying "communications Interrupted-attempting To Resynchronize".i Have Checked All The Connections...
-
Channel: PC-DMIS for CMMs
08-18-2007, 06:22 AM -
-
by bamlinI have two PCDemon seats... same versions on both (4.2MR1). When I run a program on Machine #1 and want to stop the program it gives me an "error...
-
Channel: PC-DMIS for CMMs
01-13-2010, 01:46 PM -
Comment