Probe utility NFG

[djone368]

when I open up my program tip is not defined
I hit ctrl alt P

Probe utility box completely empty
all tips gone and no picture of build up

wont let me cal the unit
cant do anything

HEEEEEEEEEEEEEELP!!!!!!!!!!!

[JIM HARRIS]

If you have your cursor at the top of the program it wont show anything.

[Boomer]

Probe Utility

Is the search path set to the correct directory?

[djone368]

Boomer

which is the correct directory

[JamesMannes]

Boomer

which is the correct directory

The correct directory is wherever you have your probe files located. Go to EDIT>SET SEARCH PATH>PROBE DIRECTORY and browse to where you have your probes located. Click APPLY>OK and you should be good to go(if this is indeed your problem).

[djone368]

it is the right directory

[JamesMannes]

Have you looked at the folder where the probes are stored? Are there any probes in there? If not you need to build the probes again, or retrieve already built probes from a backup source. Let's start there and see what you find.

[djone368]

James

no probes in forlder so I started from scratch and did probe build up and am mapping the unit right now

thanks for your help

happy 4th
and happy Canada day

Dave

[PowerJunkie]

I had the same thing happen to me on Tuesday. The configured probe angles in one of my probe files disappeared. I knew something wasn't right when I looked at the size of the .PRB file being 1kb, instead of something like 28kb. Luckily I had a backup