Tweet
I have a contructed cylinder from a scan that's skewed a bit from the axis it's supposed to sit parallel to. It's telling me the center line of the cylinder is off .040" from the parallel axis. Does anyone know how PCDMIS calculates this kind of location check?
-
I used to be high on life but I built up a tolerance.
Brown & Sharpe Global Advantage
PCDMIS CAD++ v2011mr2
PH10MQ/SP600M
sigpic -
Hmm after zooming into the graphics window, there is a gap there.I used to be high on life but I built up a tolerance.
Brown & Sharpe Global Advantage
PCDMIS CAD++ v2011mr2
PH10MQ/SP600M
sigpic -
This depends how you're locating it. Location or Position
Position, F1 the "For Axial Features" window for a description
Location, its the axis averagesigpic GDTPS - 0584Comment
-
Let's say I am measuring the location of a cylinder. When the dimensioning is done is the measurement taken from the center point along the axis and length...06-26-2008, 02:16 PM
-
I have a customer that wants to know if the true position of a cylinder only measures the location of the cylinder or does it take the perpendicularity...09-12-2016, 01:54 PM -
First post in a long time... been working quite a bit in Quindos recently. I am trying to duplicate in PC-DMIS a measurement strategy that was developed...03-01-2018, 04:35 PM
-
Hello everyone. My question is where does the concentiricty compare the results when measuring a circle to a cylinder(datum). Does it half the cylinder...04-20-2011, 05:19 PM
-
Well, I guess I am not seeing something. Everytime I try to create a cylinder
in this part, it will not show it on center of the part, nor does...07-10-2008, 04:28 PM
Comment