missing probe data.....

[Marty S]

Morning Guys

I've started the morning with totally different window layouts, toolbars, etc. I have everything back and saved except all my programs now show NO probe data in the edit window. Am I missing a setting or..........? I love monkeys....

3.7 MR3

Thanks
Marty

[Wes Cisco]

Before you open a program, check the search paths, esp the one looking for the probe directory. If it is pointed to the correct location, you may have to replace the folder with a fresh copy from your back up. HTH

[craiger_ny]

Are you saying that your probe tip dropdown is empty? Make sure your cursor is after your first loadprobe command if that is the case.

[Marty S]

Guys, here's a copy ........you can see what I mean at startup.

If I call this program up with my cursor at the end, I have no load probe commands in the edit window. I can calibrate and the probe tip dropdown is fine. The programs work as before, probes calibrate with no problems, and the correct probes are called up. The D#$* things just don't show!!!!

This isn't a huge deal for me right now, but I have a new night guy and I can see him trying to run something with the wrong tip and CRUNCH.....

I've just tried inserting the beginning load probe command and it still doesn't show.

Thanks

Marty


















PART NAME : P105460
REV NUMBER :
SER NUMBER :
STATS COUNT : 1

STARTUP =ALIGNMENT/START,RECALL:, LIST= YES
ALIGNMENT/END
MODE/MANUAL

( SHOULD BE A "LOAD PROBE AND DESCRIPTION HERE) EXAMPLE:

LOAD PROBE/2X40 BALL_10MMEXT
TIP/T1A0B0,ETC ETC


FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, ,
COMMENT/OPER,NO,Two .750" x 3" magnets at x25, y10 and x30, y10
,Two .750" x 3.25" standoffs at x25, y12 and x30, y12
PLN1 =FEAT/PLANE,RECT,TRIANGLE
THEO/73.29,70.35,-339.8,-0.0015649,0.0015298,0.9999976
ACTL/427.3,-0.83,-339.55,0.0018787,0.0044539,0.9999883
MEAS/PLANE,4
ENDMEAS/
LIN1 =FEAT/LINE,RECT,UNBND
THEO/55.89,60.23,-342.46,0.9999984,-0.0018039,0
ACTL/411.92,-9.75,-340.79,0.999983,-0.0058386,0
MEAS/LINE,2,WORKPLANE
ENDMEAS/
CIR1 =FEAT/CIRCLE,RECT,IN,LEAST_SQR
THEO/72.78,70.22,-342.06,0,0,1,7.43
ACTL/428.61,0.18,-340.08,0,0,1,7.45
MEAS/CIRCLE,4,WORKPLANE
ENDMEAS/
A2 =ALIGNMENT/START,RECALL:STARTUP, LIST= YES
ALIGNMENT/LEVEL,ZPLUS,PLN1
ALIGNMENT/ROTATE,XPLUS,TO,LIN1,ABOUT,ZPLUS
ALIGNMENT/TRANS,XAXIS,CIR1
ALIGNMENT/TRANS,YAXIS,CIR1
ALIGNMENT/TRANS,ZAXIS,PLN1
ALIGNMENT/END
MODE/DCC

[slesholdofthreep]

EDIT>PREFERENCES>EDIT WINDOW LAYOUT check SHOW TIPS?

[#2#]

I have a new night guy...

Hmmm, could he be the source of the problem???

[Marty S]

YES!!!!!!!!!.........show tips did the trick!

Thanks for the help Guys!!

Marty