Outside tolerance zone

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dwade
    replied
    Change the "PNT TARGET RAD" and "FIXTURE TOL" to whatever you want it to be and what your part can be acceptable to based the part's tolerances.



    A1 =ALIGNMENT/START,RECALL:AUTO, LIST= YES
    ALIGNMENT/ITERATE
    PNT TARGET RAD = 5, START LABEL = , FIXTURE TOL = 0, ERROR LABEL =
    MEAS ALL FEAT = NO ,MAX ITERATIONS = 99 ,LEVEL AXIS=ZAXIS ,ROTATE AXIS=YAXIS ,ORIGIN AXIS=XAXIS
    LEVEL = PNT10,PNT11,PNT12,,
    ROTATE = SM_RAD3,SM_RAD2,,
    ORIGIN = PNT4,,
    ALIGNMENT/END

    Leave a comment:


  • Underspec
    started a topic Outside tolerance zone

    Outside tolerance zone

    Doing an iterative alignment and I get a Out of tolerance zone =10. I'm using a fixture alignment along with theoritical point locations. Is there a way to adjust this tolerance zone?

Related Topics

Collapse

Working...
X