PC-DMIS 2019 R2 Crashes at startup

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • PC-DMIS 2019 R2 Crashes at startup

    Running PC-DMIS 219 R2 for a while then one morning it crashes at startup. restart everything doesn't help. Machine is shut down every night no night shift. Im the only one running this machine for about 11 yrs.

    Any Ideas on what to look for would be great.
    Thanks
    Dennis G.
    Dennis G............Don't worry Wilson! I'll do all the paddling! You just hang on!---Castaway

  • #2
    Back up your settings and try doing a Reset User. This will reset all your default user settings. You can import your backed up settings. Should do the trick. However, importing your settings back in may cause this to crash like previously. Then you just have to spend the time redoing icon layouts, search paths, etc.

    Comment


    • #3
      Program will not even let me do anything at startup, it just crash right away.
      Dennis G............Don't worry Wilson! I'll do all the paddling! You just hang on!---Castaway

      Comment


      • #4
        Originally posted by dennisgilpin View Post
        Program will not even let me do anything at startup, it just crash right away.
        You do this in Settings Editor. Does that crash as well?

        Comment


        • #5
          You should try to "talk" to the controller (hyper terminal or internet explorer, depends on the controller)

          Comment


          • #6
            Originally posted by JEFMAN View Post
            You should try to "talk" to the controller (hyper terminal or internet explorer, depends on the controller)
            Jefman, you're a robot. Remember? Only you can do that. Us humans don't talk to controllers.

            Comment


            • #7
              Originally posted by bfire85 View Post

              Jefman, you're a robot. Remember? Only you can do that. Us humans don't talk to controllers.
              Beeeeeep !
              I forgot that point....
              Maybe you could learn, it's not too hard.
              You just have to ear the difference between "bip" and "beeeep"

              On a DC241 or DC800, just type 100.0.0.1 on IE adress, and the error appears on a red window.
              On a B3CLC, you have to install hyperterminal, and type the IP adress of the cmm, then "CTRL+E+C+B", often twice, then "STATUS", and the error appears, if it's a hardware one.

              Beeeep...

              Comment


              • #8
                Does it crash, and offer you a chance to submit the crash report? or does it just shut down immediately?

                Remember that old issue where it tells you your graphics driver is outdated, and ask if you want to continue? Some people would mark the "Don't ask me again" combined with selecting the NO option. The result would be that it would just start up and shut down immediately with no prompt.

                ps: If it is truly crashing, do you submit the report? DO you add your e-mail and some comment? If you PM me your e-mail that you used (case sensitive) or your license info, I will try to see where the crash report leads to. . .
                Last edited by Don Ruggieri; 02-03-2021, 06:07 AM.

                Comment


                • #9
                  Try starting it with doubleclicking on PCDLRN.EXE in the install folder, bypassing the launcher.

                  Does it still crash?
                  PC-DMIS CAD++ 2o19 R1 SP11

                  Comment


                  • #10
                    Try running in admin mode

                    Comment

                    Related Topics

                    Collapse

                    Working...
                    X