printing reports

[Clay_Man]

PCDMIS CAD++ 3.7 MR2

After executing a program(any program) my report will not print.

Print command is turned on, to get my report to print, I have to go to print preview than hit print.

[Don Henger]

PCDMIS CAD++ 3.7 MR2

After executing a program(any program) my report will not print.

Print command is turned on, to get my report to print, I have to go to print preview than hit print.

I had somthing similar when programing, the text screen would disapear. I had to go to the print preview screen and look at it then close it and it would came back in the regular program (text) screen. So look at print preview then go back and try to print your report. I switched to 3.7mr3 I don't have these demons any more. Just a thought.

[JamesMannes]

Do you have the printing turned on via a print command and also by having the check box on for a regular printing? It seems that I remember a problem with the check boxes being checked in both areas?

[dwade]

Make sure draft mode is not checked. Depending on how you want to print your report this can stop it from printing.

[Clay_Man]

Was doing a 30 piece study, at part #28 it start to print.
Thank for the help

[Don Henger]

Was doing a 30 piece study, at part #28 it start to print.
Thank for the help

It sounds like this post is resolved

Out of curiousness what fixed it????

[Clay_Man]

It sounds like this post is resolved

Out of curiousness what fixed it????

Got me it just started to print.

[rangerboat72]

Got me it just started to print.

Don't you just love the Demon...

http://i76.photobucket.com/albums/j2...um/demons3.gif