Tweet
Hi, When I click okay to home, the Machine Start light goes out and the CMM will not home.
I don't know what to try next.
I don't know what to try next.
-
-
I’ve had that happen but had to Hex involved because it was an issue with the controller.Darroll
2018R2 -
Okay, thanks. I will let my manager know we have to call Hexagon. Could it be air pressure?Comment
-
It could be that too. Check your wires and make sure everything is tight.Darroll
2018R2Comment
-
We called Hexagon, and the light had gone out on the head. I just took the tip off, put it back on, and we were good to go! Lessons learned. LOLComment
-
Is there a way to home the machine without shutting down the controller and PC-DMIS?08-26-2014, 06:00 PM
-
After the weekend, the Sheffield Discovery III won't even go to its home position anymore (far front and far left corner). How can I restore the home...08-17-2009, 07:58 AM -
Does anyone know if there is a way to tell pcdmis how to home the machine?
Sent from my SCH-I545 using Tapatalk 409-25-2013, 10:02 AM -
Had yesterday off sick, came in today and started CMM. Clicked yes to home and CMM made the little square movement but not at the front of the machine,...08-02-2017, 08:19 AM
-
when i start the machine automatically should be go to home but doesn't it,the machine start in this coordenates
x=-7.0467
y=-4.3846...09-29-2009, 01:58 PM
Comment