Tesa probe damped problem

[gppcdmis]

Hi everyone. Can anyone suggest how to reset a tesa probe HP TM MF?
I slightly crached it and **** thing is always showing that is damped.
yellow light on damped
Controller HH C V2.0
Please help

Ps im not sure I like these Tesa probes, very sensitive

[JEFMAN]

Unscrew it, clean it,re screw it, reboot all... And if it's the same, it's surely broken...

[gppcdmis]

Thanks, im gonna use renishaw tp20, much higher quality
these Tesa tp20 are horrible

[Peter Fuller]

Thanks, im gonna use renishaw tp20, much higher quality
these Tesa tp20 are horrible

The Hexagon US kinematic touch trigger is manufactured by Renishaw.

[gppcdmis]

So how do you fix a damped tessa tp20?

[Mike Ruff]

One possible solution-

If the 2 pins are sticking up out of the mounting face, try putting the mounting face on the granite, and VERY GENTLY press on the module until they are pushed back in flush, so that it's no longer wobbly when resting on the mounting face. This tends to happen whenever these are crashed hard...

[gppcdmis]

That's the thing it wasn't a crash crash, just slightly down movement at 0,0 z.
Not sure why would it damage the tessa tp20