Error command Auto Cylinder - Adaptive Cylinder Line Scan

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cumofo
    replied
    I find reversing the angle vector fixes that, and an "unexpected move error" also.

    Leave a comment:


  • JEFMAN
    replied
    There are some fixes on adaptive scans in the different SP of 2019R2 (but nothing about cylinders). Maybe an update could fixe it ?
    Is it an inner or outter cylinder ? mm or inches ?
    Maybe unselect "circular moves" in F5 or in the autofeature window could help ?

    Leave a comment:


  • Error command Auto Cylinder - Adaptive Cylinder Line Scan

    Hello,
    I create auto cylinder as a adaptive scan and choose Adaptive Cylinder Line Scan. While measuring machine measure one line from 5 generated and I had error: „Circular movement cannot start from the circle center”. I don't have any colission or strange contact with the detail. Probe stops in the middle of cylinder with no contact.
    To avoid this error I change diameter of this cylinder from 3.8 to 3.7 and it works good.

    Why this error appears?

Related Topics

Collapse

Working...
X