Reports

[francisco_cmm]

Hello Team,

Quick question. How can I stop my datums from showing in my reports. could someone please explain why is that its out of tolerance. I don't know how to explain this to the , so I rather now have it shown.

Capture.JPG

[brian.freeman]

This has been an on-going bug with PC-DMIS. There are numerous threads about this: Datum out of tolerance.
One thing I have figured out, is dimension (TP) Datum D first; if has a TP, then assign the datum def to it, then in the Reporting section , select none for output. then it will apply tolerance and bonus.
Sometimes this will bring the datum back into 'tolerance'

[francisco_cmm]

Interesting Thank you for your help. if I understood correctly and I did what you suggested. now the actual thing does not show on the report. I'm going to post a picture of it

[francisco_cmm]

Capture.JPG

if I select output to none. on the report it doesn't show.

[brian.freeman]

That is correct. Glad to help.

[francisco_cmm]

if I turn this to NONE. NOTHING shows on the actual report. like nothing gets reported.

[francisco_cmm]

I got it!!!

I was playing around with legacy dimension mode and i was able to turn it off so it doesnt show on the report. I dont know why, but if i turn off legacy mode and try to do it, it doest work. By the way i am using pcdmis 2018 r1.

[brian.freeman]

Nothing gets reported in the REPORT. But you can also report it later. Sometimes in the 'flow' of reporting items; things get reported in the wrong order. This is just a work around.