Probing parameters for sheet metal inspection

[Satheeshkumar]

what is probing parameters for sheet metal inspection?
Our Machine probe heads are PROBEPH10MQ & HH-AS8-T2.5 (Leitz_Lspx1h-t)
please suggest me probing parameters like probe max force, lower force, upper force, trigger force, return speed

[Matthew D. Hoedeman]

TTP have no force settings, they are what they are

[Peter Fuller]

Analogue scanning parameters are not variables. These values are assigned by what model controller you have and what scanning head you have. You should contact support or service to get the correct information for your machine.

[neil.challinor]

There should be a file called pcdparams.txt saved locally on each machine. This is usually in C:\autotune\ but the location may vary depending upon which country you are in and which service engineer installed your CMM. The file should contain all of the probing parameters for that particular CMM / probe head / probe type configuration. DO NOT copy files between machines as the parameters are unique to the machine / controller type. Once you have the file, you can use the settings editor to check / edit all of the probing parameters.