Tweet
Hii. I am trying to measure chamfer 1 x 45 degree. How should i do that?
-
-
Measure the chamfer using autocones and output the angle.Darroll
2018R2 -
I cheat on them too! A 4 inch scale!!Darroll
2018R2Comment
-
If it's outside, throw it on the comparator, If it's inside make a mold, and put it on the comparator.(In Memory of my Loving wife, "Ronda" who I lost March 7, 2016. I love you baby.)They say "Nobody's Perfect." I must be Nobody.
Comment
-
know what I hate about chamfers is when you have a shitty machinist who uses the chamfer to turn one sharp edge into 2 burrsComment
-
At this time we are manufacturing parts on a Lathe. I have some features that have a 20 degree +/-2 deg C/O, like a large countersink. It is a relief...09-20-2018, 01:40 PM -
I'm looking for some help in measuring a tapered roller from a tapered roller bearing. i need to measure the angle of the cone to within .001 degrees...04-08-2009, 04:02 PM
-
Hi everyone.
I would like to measure chamfer distance and angle as per below requirement;
0.035 - 0.025 x 45degree
...09-17-2019, 12:24 AM -
How would you measure the angle of the face of a cone in relation to an adjacent plane? I'm getting a close but no cigar (48 deg. -vs- 50 deg.) When I...08-19-2008, 04:13 PM
-
This diameter seems to be exactly at the end of the chamfer, so how can I measure it using PC-Dmis?
...10-08-2021, 01:14 PM
Comment