Program automatically continues?

[bphillips]

Something has to be turned on but I can't find the location.
When taking a manual alignment, after the last point of a feature it automatically goes to the next feature without me hitting the done button.
Likewise when the last hit is taken in the manual alignment it takes off running the dcc program. Not cool.
Where's the setting so I can stop this behavior.

[R2ah1ze1l]

Add an operator comment box to prevent DCC taking over.
"Manual Probing Complete...DCC takes over after selecting 'OK'"...?

[bphillips]

I know the work arounds.
I am trying to figure out what got turned on for this behavior.
The other nine machines do not act like this.

[KIRBSTER269]

You don't have a Comment in there that has this checked with a second in there do you?

Capture.JPG

[bphillips]

That's where I've seen auto-continue...but no, I don't have any comments.
I opened a blank/brand new program.
Manual is a plane and two circles, then dcc.
When I take the last hit in the second circle it just goes to the next, doesn't even come out of the hole.
Luckily my prehit was big enough it doesn't crash.

[dwade]

This

Add an operator comment box to prevent DCC taking over.
"Manual Probing Complete...DCC takes over after selecting 'OK'"...?

or you might want to F5 for setup options in the General tab and scroll down and make sure "Press End Key" is checked. Make sure you do this in your program template then save it.

[R2ah1ze1l]

I've had this occur before, it wasn't a setting as you are thinking. Do to the use of groups we have seen times where a label has shifted to an inappropriate location. (Just because a user was expanding and closing groups) Which lead to parts seeming to be on longer cycles.

If you use goto/ commands and labels, they are a good location to search/sift through.
Alternative:
Export your Edit window in DMIS, sometimes you can catch 'hidden' lines that are no longer visible.

If it is something that seems 'machine specific' you may need to look through setup options that have been changed. (as some have already mentioned)

Hope you figure it out!

[bphillips]

The "Press End Key" was the solution.
Thank you