Tweet
What am I doing wrong ? I have used paste with pattern previously - -pattern and put in offsets and number of times then copy & paste with pattern using EDIT - now it wants to paste the features using the pattern correctly, but my original features are missing (all features are auto circles / cylinders using CAD)
-
-
make sure that the original features are NOT still highlighted, or it will replace them with the pattern.sigpic
Originally posted by AndersI -
Highlight features, copy, edit pattern, then paste with pattern after putting cursor where you want them to go.153010 Global Advantage w/ LSPX1H_T Analog Probe
7107 Global Classic TP20
2019R1 SP1 CAD++Comment
-
thank you bothComment
-
I showed this awhile back that was introduced in 2018.
https://www.pcdmisforum.com/forum/pc...little-feature
-
-
Ok have 20 holes to measure and want to do paste with pattern. I understand how to do the paste with pattern and it works fine, but I want to make life...05-25-2006, 05:42 PM -
Hi,
I am using 2011 MR1 and try to use edit|pattern and edit|paste with pattern in the program, but it doesn't work now(it works sometime...04-13-2012, 02:30 PM -
I'm hoping someone here can help me......I'm running PC-DMIS 4.2 MR1....I'm trying to use the Paste with Pattern feature........I'm checking a part with...02-12-2008, 11:10 AM
-
Hey all,
Running 2013. Recently upgraded from v3.2063. I'm attempting to use Paste with Pattern at 45° 7 times on a round pot. PCDMIS...10-09-2013, 02:53 PM -
I downloaded 2011 version today.PCdmis keep crashing every time I tried to paste with pattern.I had the same problem with 2010 version.I crashes even...04-27-2011, 08:10 PM
Comment