PC-DMIS 2019 R2 released

[vpt.se]

Readme:
http://software.hexagonmi.com/public...ase/Readme.pdf

Download:
https://support.hexagonmi.com/s/arti...C-DMIS-2019-R2

11(!) pages listing new features
16(!) pages of fixes - impressive Don Ruggieri !

[michaelwildschutz]

I was thinking exactly the same thing as I read thru the several pages of fixes....

[vpt.se]

I hope the "fixing bugs"-momentum will continue for upcoming releases and SP's!

EDIT: Might just have been fixing too much judging by the early adopters reports, wouldn't you say michaelwildschutz ?

[Kp61dude!]

Readme:
http://software.hexagonmi.com/public...ase/Readme.pdf

Download:
https://support.hexagonmi.com/s/arti...C-DMIS-2019-R2

11(!) pages listing new features
16(!) pages of fixes - impressive Don Ruggieri !

I don't think I've seen so many fixes at once. I felt encouraged enough to download and install this version. I will be playing with it from now on unless I hit a brick wall.

[A-machine-insp]

I will be installing it as soon as I get clearance to do so.

[bfire85]

I don't think I've seen so many fixes at once. I felt encouraged enough to download and install this version. I will be playing with it from now on unless I hit a brick wall.

You will. I am about 3 SP's sure! lol

[Kp61dude!]

You will. I am about 3 SP's sure! lol

I haven't gotten passed ol' trusty 2015.1 SP10 due to them walls! Staying positive and giving every 2nd or 3rd release, after a 'major' one, a try. Or else... Boeing for example = stone age.

[Kp61dude!]

Trying to figure out this new measurement strategy editor and I've followed what's on here:
https://www.youtube.com/watch?v=KSRHihxtduE

BUT

I built a "No Avoidance" profile but vector points still have em' no matter what I try I can't get rid of them. Bug or Operator mistake? How do you get rid of the avoidance moves?

[michaelwildschutz]

not you I posted this on the very first release of 2019 R2.it happened to me as well and Don Ruggieri never responded to my post.So it is a bug cause it happens on my version as well

[rjurca]

I can duplicate what you describe. We will look into this

[rjurca]

I was able to get good results. What type of probe are you using? I had an lspx1 which requires different MSE entries than a simple ph9. In my case with the lspx1 I have to set the analog parameters not "touch trigger" My steps follow
1. in the MSE. Select analog as the probe type.
2. change vector point, avoidance moves to none
3. "save as" to a new group
4; set the new group as default and close MSE
5. quick feature a vector point

You can contact me directly if you have more questions. [email protected]

[mitkos]

I try it out and got some weird movement during probe changing. I got back to 2019 R1 version, same program no weird movement… For now I will skip R2 for some time...

[Kp61dude!]

not you I posted this on the very first release of 2019 R2.it happened to me as well and Don Ruggieri never responded to my post.So it is a bug cause it happens on my version as well

Looks like I'll be sticking with 2015.1 for a little while longer.

[vpt.se]

What good are 16 pages of fixes if they generate 11 pages of bugs... Goddammit.

[mitkos]

"Moved the Excel Form Report menu option from Insert | Modules | Excel Form Report to Insert | Report Command | Excel Form Report. See PCD-161763 "

Am I blind or what???

[AndersI]

If you don't see it in the Report Command menu, you may need to do a "Reset user" in Settings Editor.

[Kp61dude!]

I was able to get good results. What type of probe are you using? I had an lspx1 which requires different MSE entries than a simple ph9. In my case with the lspx1 I have to set the analog parameters not "touch trigger" My steps follow
1. in the MSE. Select analog as the probe type.
2. change vector point, avoidance moves to none
3. "save as" to a new group
4; set the new group as default and close MSE
5. quick feature a vector point

You can contact me directly if you have more questions. [email protected]

It works! Thanks rjurca . I also have an lspx, fyi. Back on the 2019 R2 bandwagon!