Tweet
Does anyone know which program to use to verify the CATIA model has been translated correctly to a IGES or STEP file? I know this of off topic, I can repost if need be.
Thank you
Thank you
-
-
The software we use to satisfy translation requirements is Kubotek. And yes, this would be an Off-Topic post.
HTHLast edited by RIDER; 08-13-2019, 12:19 PM.153010 Global Advantage w/ LSPX1H_T Analog Probe
7107 Global Classic TP20
2019R1 SP1 CAD++ -
Thank you RIDER!!Comment
-
Kubotek is also what we use. Most of our work goes to Boeing as well.Remembering my beautiful wife Taz who's life was lost on 6-13-2020. I love you and I miss you.Comment
-
I'm using pcdmis 4.1. whenever i change the file extension in catia to .iges, or .stp, then import the model in pcdmis. I never get what I want.
...01-25-2013, 09:16 PM -
To import a Catia file you will need a Catia DCT (direct CAD transfer) module.
problem with this: PC-DMIS is not kept up to date with the latest...06-11-2009, 01:36 PM -
I have a couple of fixture model that were created in Catia v5 rev17 and converted to iges that I'm having problems importing. Any ideas as to why?09-22-2008, 08:17 AM
-
I changed jobs about a month ago and was looking at some of the cad models in their native Catia and noticed that all the GDT is on the model. Why isn't...03-19-2013, 09:52 AM
-
So, I'm new to the position. I'm now the only CMM programmer here. And I'm running into an issue. Here's what happens... our engineering department, who...02-10-2015, 04:28 PM
Comment