Tweet
Loading/Unloading issues from the MCR20 probe rack, PH10M re indexing
Loading/Unloading issues from the MCR20 probe rack - PH10M head tries to re index to 0,0 while above the probe slot during pickup and crashes
I just setup the MCR20 rack, calibrated, set my clearance move, docking speed and all the goods (not my first time)
When the machine moves to the rack it hesitates on the drive over (like its thinking) goes to my set point, drives to the rack, aggressively loads probe into the slot then moves out to go to the next slot and the PH10M tries to re index to 0,0 while its picking up the next probe which im sure you can imagine... doesnt look good or work for that matter lol.
First time running into this issue, I have recalibrated the rack a couple times with my master probe (2x30). I could be wrong and looking over something but I dont think the issue is in probe build or rack calibration, seems deeper...
any help would help, if help is hard to find help me find help to help out, help.
Machine - Zeiss - Eclipse
- PH10M
-TP20s
Software - 2017 R2
I just setup the MCR20 rack, calibrated, set my clearance move, docking speed and all the goods (not my first time)
When the machine moves to the rack it hesitates on the drive over (like its thinking) goes to my set point, drives to the rack, aggressively loads probe into the slot then moves out to go to the next slot and the PH10M tries to re index to 0,0 while its picking up the next probe which im sure you can imagine... doesnt look good or work for that matter lol.
First time running into this issue, I have recalibrated the rack a couple times with my master probe (2x30). I could be wrong and looking over something but I dont think the issue is in probe build or rack calibration, seems deeper...
any help would help, if help is hard to find help me find help to help out, help.
Machine - Zeiss - Eclipse
- PH10M
-TP20s
Software - 2017 R2
Comment