Help: Alignment for the part

[VarSlovenia]

Hallo,
I need the help creating a alignment for the part in the drawing. For this part, the customer has specified the A, B and C datum.
Does anyone have advice on how to create aligning for this part?

Thanks.

[bfire85]

A: Cylinder (Level Z and XY Translation)
B: Constructed line of mid-point of the two 15° surfaces and A (Rotation)
C: Point (Translation in Z)

That TP is going to be interesting as it's at an angle. Do you have a CAD model. Looks like you'll need to derive the basics off the model.

[VarSlovenia]

Thanks. Can I use itterative alignment or "normally" 321?

[bfire85]

VarSlovenia I am not an iterative alignment guy. Most of what I measure is pretty much 321.

[RandomJerk]

Do the datum cylinder as a fixed radius, but definitely report it as least squares.

[VarSlovenia]

I failed to make alignment. Can anyone help make a alignment? I can send CAD model.

[Darrollh]

Send CAD and.print to [email protected]. I will help.you.

[VarSlovenia]

Send CAD and.print to [email protected]. I will help.you.

I sent drawing and CAD model to your email.

[Darrollh]

Got it. I will reach out to after a while. I'm putting out a fire.

[KIRBSTER269]

Send CAD and.print to [email protected]. I will help.you.

Spam the heck out of this email