Text File Reporting Issue

[andrzejewski988]

I am trying to save my results as a .txt file which I have been able to do but I am having an issue with how it is coming out. I measure GD&T dimensions using Xact Measure but when I get the .txt file it appears to be reporting like a legacy GD&T dimension (see example) Also I had multiple holes selected in the GD&T dimensions but it only looks to be showing one. Is there any way to have it show the xact measurements in a .txt file?
Capture.PNG

[JaredHess]

How are you saving the .txt report? I do know that old style legacy text reports only support legacy dimensions:
https://docs.hexagonmi.com/pcdmis/20...ext_Report.htm

[AndersI]

I don't think there's any built-in way of getting a text report of Xact dimensions. When you switch the Report Window to Text Mode, you should get a warning that only Legacy is supported (unless you've checked the "Don't tell me again" box).

TextModeReportLegacyOnly.PNG

The only way I can think of is using the Excel export (to .CSV) to get a text file. Example:

;;;;;;;;;;;;;;;;;;;;;
;"PC-DMIS Measurement Routine";Basprog.PRG;;;;;;;;;;;;;;;;;;;
;"Part Name";basprog;;;;;;;;;;;;;;;;;;;
;"Revision Number";;;;;;;;;;;;;;;;;;;;
;"Serial Number";;;;;;;;;;;;;;;;;;;;
;Date;8/7/2019;;;;;;;;;;;;;;;;;;;
;Time;"10:49:20 AM";;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;
;DIMENSION;DESCRIPTION;FEATURE;AXIS;SEGMENT;NOMINAL;MEAS;" +TOL";" -TOL";BONUS;DEV;OUTTOL;DEVANG;"DATUM SHIFT EFFECT";"UNUSED ZONE";"SHIFT X";"SHIFT Y";"SHIFT Z";"ROTATION X";"ROTATION Y";"ROTATION Z"
;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;
;LOC1;UNITS;MM;;;;;;;;;;;;;;;;;;
;LOC1;"Dimension Location (CIR1)";;X;;0.000000;0.000000;0.100000;-0.100000;;0.000000;0.000000;;;;;;;;;
;LOC1;"Dimension Location (CIR1)";;Y;;0.000000;0.000000;0.100000;-0.100000;;0.000000;0.000000;;;;;;;;;
;LOC1;"Dimension Location (CIR1)";;D;;60.500000;60.500000;0.100000;-0.100000;;0.000000;0.000000;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;
;LOC1_REF;UNITS;MM;;;;;;;;;;;;;;;;;;
;LOC1_REF;"Dimension Location (CIR1)";;X;;0.000000;0.000000;0.100000;-0.100000;;0.000000;0.000000;;;;;;;;;
;LOC1_REF;"Dimension Location (CIR1)";;Y;;0.000000;0.000000;0.100000;-0.100000;;0.000000;0.000000;;;;;;;;;
;LOC1_REF;"Dimension Location (CIR1)";;D;;60.500000;60.500000;0.100000;-0.100000;;0.000000;0.000000;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;
;FCFLOC1;UNITS;MM;;;;;;;;;;;;;;;;;;
;FCFLOC1;"FCF Position (CIR2,CIR3)";;DF;;15.000000;15.000000;0.000000;0.000000;0.000000;0.000000;0.000000;;;;;;;;;
;FCFLOC1;"FCF Position (CIR2,CIR3)";;DF;;15.000000;15.000000;0.000000;0.000000;0.000000;0.000000;0.000000;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;
;FCFLOC1;UNITS;MM;;;;;;;;;;;;;;;;;;
;FCFLOC1;"FCF Position (CIR2,CIR3)";CIR2;TP;;0.000000;0.000000;0.000000;;0.000000;0.000000;0.000000;45.000000;0.000000;0.000000;;;;;;
;FCFLOC1;"FCF Position (CIR2,CIR3)";CIR3;TP;;0.000000;0.000000;0.000000;;0.000000;0.000000;0.000000;180.000000;0.000000;0.000000;;;;;;
;;;;;;;;;;;;;;;;;;;;;
;FCFLOC1;UNITS;MM;;;;;;;;;;;;;;;;;;
;FCFLOC1;"FCF Position (CIR2,CIR3)";Set;X;;30.470000;31.000000;;;;0.530000;;;;;;;;;;
;FCFLOC1;"FCF Position (CIR2,CIR3)";;Y;;50.000000;50.000000;;;;0.000000;;;;;;;;;;
;FCFLOC1;"FCF Position (CIR2,CIR3)";;Z;;-0.530000;0.000000;;;;0.530000;;;;;;;;;;
;FCFLOC1;"FCF Position (CIR2,CIR3)";CIR2;X;;30.439000;31.500000;;;;1.061000;;;;;;;;;;
;FCFLOC1;"FCF Position (CIR2,CIR3)";;Y;;19.500000;19.500000;;;;0.000000;;;;;;;;;;
;FCFLOC1;"FCF Position (CIR2,CIR3)";;Z;;-1.061000;0.000000;;;;1.061000;;;;;;;;;;
;FCFLOC1;"FCF Position (CIR2,CIR3)";CIR3;X;;30.500000;30.500000;;;;0.000000;;;;;;;;;;
;FCFLOC1;"FCF Position (CIR2,CIR3)";;Y;;80.500000;80.500000;;;;0.000000;;;;;;;;;;
;FCFLOC1;"FCF Position (CIR2,CIR3)";;Z;;0.000000;0.000000;;;;0.000000;;;;;;;;;;