What about ISO14 405-2-2018 in PC-DMIS ?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    What about ISO14 405-2-2018 in PC-DMIS ?

    I just saw the "new" ISO 14 405-2, there are some interesting subjects on radius cotation, distances between axes (...).
    Is there some enhancements about it in PC-DMIS ?

    ISO 14 405-2 : Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2 : dimensions other than linear or angular sizes
    Tags: None
  • #2
    Originally posted by JEFMAN View Post
    Is there some enhancements about it in PC-DMIS ?
    Be careful asking the demon for more "enhancements"!
    • 1 like

    Comment

    • #3
      This one is for Rob Jensen fosho'!
      PC-DMIS CAD++ 2o19 R1 SP5
      • 1 like

      Comment

      Previous template Next

      Related Topics

      Collapse
      • qcfire65
        finding the degree
        by qcfire65
        I am trying to find the 36.5`(circled in red) within this print; how would I go about doing that? The only other thing that I am measuring are the two...
        09-17-2014, 03:01 AM
      • koike
        measuring a rotated radius
        by koike
        I'm new to the CMM world and we're trying to measure a rotated radius (picture a cone with a concave wall.) Anything I've tried so far, short of making...
        08-11-2009, 12:22 PM
      • d.evans
        inside corner radius
        by d.evans
        With only 90 degrees of arc, how accurate should I expect a corner radius measurement to be using my CMM?
        I've got a part with a R .250" +.000/-.003"....
        06-16-2006, 11:30 AM
      • JoshL
        Radius Tolerances
        by JoshL
        I have some questions on the tolerance for an arc radius. I have one part with 48.7° of arc on a 3.250" radius and the customer wants us to hold...
        02-23-2009, 10:57 AM
      • Perry Fisher
        Radius checking
        by Perry Fisher
        I'm checking several appliance parts that have very large radii to the tune of 360 inches. I only have 4° of radius available. I know this is no where...
        06-01-2007, 01:07 PM
      Working...
      X