VER 2018. Building a probe and bought a new Renishaw knuckle ( A5003-4697 ...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • AndersI
    replied
    It's there in those versions too. What is your exact build - have you selected an extension that doesn't end in M2?

    Leave a comment:


  • Paul Sarrach
    replied
    So what do I do? I have 2018 and 2019

    Leave a comment:


  • RandomJerk
    replied
    From the probe.dat file in 2015:

    Code:
    ITEM:KNUCKLE_M2_13.5mm M2
    comment A-5003-4697
    ribcount 10
    color 151 151 148
    cylinder 0 0 0 0 0 -11 4
    manualjoint 0 0 -7.5 0 0 1 0 -1 -180 180 knuckle
    color 151 151 148
    cylinder 0 0 4 0 0 -3.5 4
    cylinder 0 0 -3.5 0 0 -6 3
    connect 0 0 -6 0 0 1 M2
    Your exact part number is defined as stated.

    Leave a comment:


  • bfire85
    commented on 's reply
    I have 2019 R1, but still have both versions of 2018 on my offline seat. Both have what I attached above.

  • Paul Sarrach
    replied
    No, only the M2. I have the latest version of 2018. What do you have?

    Leave a comment:


  • bfire85
    replied
    You don't see these at all? Both releases of 2018 on my end show knuckles in the probe list.

    Probe_List.jpg
    Last edited by bfire85; 05-16-2019, 07:08 PM.

    Leave a comment:


  • bfire85
    replied
    Part Number A5003-4697 comes up as the 13.5mm. What part number is the 11.5 one?

    Leave a comment:


  • Paul Sarrach
    replied
    I have that one. And the 11.5 also.

    Leave a comment:


  • bfire85
    replied
    KNUCKLE_M2_13.5mm isn't the one you need?

    Leave a comment:


  • VER 2018. Building a probe and bought a new Renishaw knuckle ( A5003-4697 ...

    ) and it is not in the Probe Description drop down menu?

    What do I do to update my Probe Description menu to show this knuckle so that I can install it into my build?

Related Topics

Collapse

Working...
X