Showing Probe Calibration Results on Inspection Report

[zoolander303]

Quick question I forgot how to do this and its something the customer wants. Before I start the program I want to calibrate the probe for the angles I am going to use during that program, and I want those results displayed on the top of the inspection report showing the probe is calibrated and accurate. Any advice would be great, thank you.
PC DMIS CAD + + 2016

[Sora5]

Create a parameter set for all your angles then in your edit window, Insert->Calibrate->Autocalibrate Probe. F9 the added code and select your options.

[louisd]

make sure you toggle display results on, within autocalibrate command.

[zoolander303]

thanks guys