Hi to everybody

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hi to everybody

    My Name is Luis Aguayo,I'm a junior Member,Well some of you guys are been helping me with the Cmm Technical Questions,Sorry I did not intruduce myself before,I'm worry about running the Cmm and having programs ready for First Piece Production.I'm from Cicero Illinois.Thank you all,Iwill be bothering you for a while.


    Luis Aguayo

  • #2
    No problem Luis. Most of us don't do anything else. LOL
    sigpic

    Comment


    • #3
      Don't feel bad. I am new to this too. I have asked some of those STUPID QUESTION already. The people here are some of the nicest I have dealt with. They jump right in and try to help the best they can.
      I can honestly say that without this board I wouldn't have learned as much as I know now.
      Thanks to all the Senior Members her for what they do.
      B. Jacobs
      B&S Global 12.15.10
      2014.1

      Comment


      • #4
        Well,it just that you how it is,I went to the PC Dmis 3.7MR3 Basic class four weeks ago,I came back to work and my boss was like yeah,you should be able to do this and that.I been making programs on Pc Dmis,but the class is just that Basic.Thanks that I used Virtual Dmis four years Ago and I had used
        Multiple Manual Cmm's otherwise,I will be more lost in PC Dmis.

        Comment


        • #5
          Are you sure you don't work here. Same thing for me. Went to the school and came back knowing just the basics but they think you know the world. The boss brings in a aprt, lays it on the table, walks out, comes back in 5 min., asks "Is my part good?". I have this Deer in the headlights look and say I am doing the best I can. He leaves and then I get it going about 15min later and go to him and say "your part is good". then it starts all over again. What fun
          B. Jacobs
          B&S Global 12.15.10
          2014.1

          Comment


          • #6
            Welcome aboard the crazy train!!
            sigpic

            James Mannes

            Comment


            • #7
              http://www.mmiclan.com/smilies/vb_wave2.gif

              Comment


              • #8
                You do get more and faster help from this board, then if you call b & s . welcome aboard.
                sigpic


                Was
                Pc-dmis 3.5 MR1 B & S 2009 MR1

                Now
                2010 MR3

                Comment


                • #9
                  Welcome

                  Comment


                  • #10
                    Don't be afraid to ask, anything. . .

                    If it wasn't for those questions, soe of us would never make Senior Members.

                    Then too, there are those people who will post a message on just about any subject :0

                    Comment


                    • #11
                      Don - are you implying that some ppl post just to increase their membership status? LOL
                      v2013 MR1, v2015.1
                      B&S Global 544, 555
                      Mitutoyo A504 w/PC-DMIS

                      sigpic
                      Since 1994

                      Never force anything. Get a bigger hammer.
                      (Advice from my dad.)

                      Comment


                      • #12
                        Please, keep asking those stupid questions. Then I can just read the answers without revealing the level of my ignorance.

                        TK
                        sigpicHave a homebrew

                        Comment


                        • #13
                          Welcome !!!

                          Coot

                          Comment


                          • #14
                            Luis - welcome to the board and the wonderful world of PC-DumbA** - uh - PC-DMIS. Even the most experienced users on this board will tell you they still learn new stuff.
                            Your situation is typical; the company sends you to class and the ********* expect an instant expert. Your background with other languages will help you a lot.
                            v2013 MR1, v2015.1
                            B&S Global 544, 555
                            Mitutoyo A504 w/PC-DMIS

                            sigpic
                            Since 1994

                            Never force anything. Get a bigger hammer.
                            (Advice from my dad.)

                            Comment


                            • #15
                              Welcome.. if you can't figure it out just ask here.. someone will have the answer... or it will drive everyone nuts till you get one...lmao
                              sigpic
                              if you had soap on a rope it would be tied to yer ankle

                              Comment

                              Related Topics

                              Collapse

                              Working...
                              X