Dp/Database naming.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dp/Database naming.

    I'm sure this was asked before. What do you guys think is the best
    database's naming convention?

    Per part number C:\DATAPAGE\PART
    Per per customer C:\DATAPAGE\CUSTOMER\PART

    Or per CMM name C:\DATAPAGE\GLOBAL\PART
    (if more than one) C:\DATAPAGE\PFX\PART

    I know is just personal preference, but perhaps there are some advantages.

    Thanks for your opinion.
    Last edited by Roberto; 04-01-2007, 11:01 PM.
    sigpicIt's corona time!
    737 Xcel Cad++ v2009MR1....SE HABLA ESPAÑOL

  • #2
    I do the following...
    Per customer C:\DATAPAGE\CUSTOMER\PART
    sigpic

    James Mannes

    Comment


    • #3
      Originally posted by JamesMannes View Post
      I do the following...
      Per customer C:\DATAPAGE\CUSTOMER\PART
      Thanks for the feedback James.
      sigpicIt's corona time!
      737 Xcel Cad++ v2009MR1....SE HABLA ESPAÑOL

      Comment


      • #4
        Originally posted by JamesMannes View Post
        I do the following...
        Per customer C:\DATAPAGE\CUSTOMER\PART
        I would recommend the same thing, but I'd also make sure that you keep backup copies so the data doesn't get lost whenever Datapage decides to corrupt the file...
        sigpic
        Xcel 15-20-10 - PFXcel 7-6-5 - Merlin 11-11-7 - Romer Absolute 7525SI
        PCDMIS 2012
        Windows Office XP

        Comment

        Related Topics

        Collapse

        • Geister
          Database User Error: -18
          by Geister
          Our 2nd shift CMM operator was doing a 30 pcs dimensional study. On the 27th part datapage displayed the following error. (Database User Error: -18 record...
          04-08-2013, 01:17 PM
        • JJordan
          datapage error
          by JJordan
          I just downloaded datapage v.3.33. I had version 3.32. The tech support said that it should write over top of 3.32 without any problems. I created...
          10-13-2006, 12:03 PM
        • sdaley
          database management
          by sdaley
          Hello,

          Finally going all in with DP+ 5.0 after years with DPRT (had no choice). A couple of questions....in DPRT I would ASCII dump and...
          01-06-2017, 01:01 PM
        • BrandonACMT
          Datapage+ Use Specific Database
          by BrandonACMT
          I don't know if this question has been asked before. I cant find anything.

          I understand that Datapage uses the Part Name from the program...
          05-23-2017, 09:39 AM
        • roddawg
          datapage
          by roddawg
          What causes the following database error:

          "Error: Unable to access database for write operation"

          It scrolls through...
          06-08-2006, 04:46 PM
        Working...
        X